HomeStaffStaffPramod Koshy

Pramod Koshy Associate Professor

Headshot of Pramod Koshy
areas of expertise
  • Development of catalytic films and nanoparticles for water and air purification
  • Utilisation of waste materials in ceramic and metallurgical applications
  • Understanding coke degradation mechanisms in blast furnace operations
  • Development of bioceramic coatings and nanoparticles for cell therapies and implants
education
  • Ph.D. (Materials Science and Engineering), UNSW, 2009
  • M.Tech. (Materials Science and Technology), NIT-Calicut, India, 2004
  • B.Tech. (Mechanical Engineering), University of Kerala, India, 2002

Associate Professor Koshy’s primary research foci is on the development of advanced materials for environmental and energy applications, particularly the transformation of waste materials/industrial by-products into value-added materials for economical and industrially-viable high-performance applications.

He is the co-leader of the NEMCAT (Novel Engineered Materials for Conventional and Applied Technologies) group in the School of Materials Science and Engineering UNSW Sydney which focusses on understanding the correlations between structure-properties for different conventional and advanced materials. He also leads the Vecor-UNSW collaborative research program for materials for energy and environmental applications through the Australian Trailblazer for Recycling and Clean Energy.

In 2024, Associate Professor Koshy was awarded an Australian Research Council 4 year mid-career industry fellowship to undertake research for Vecor’s ceramics project to enable high volume manufacture using a novel nanotechnology of coated fly ash particles to simulate titania as paint pigment/filler. He has also won the Australian Citation award, the Faculty of Science Teaching Excellence Award and the Vice Chancellor’s Excellence Teaching Award.

Associate Professor Koshy has co-authored >150 publications, 4 international patents, supervised over 40 HDR (18 current) and 99 Honours students (10 current) to completion.

See Google Scholar.

Publication Metrics

Publication Metrics for Pramod Koshy

Koshy P; Pudadera B; Majidi T; Zhong V; Wong VC; Zheng X; Ho N; Cheng TK-H; Sorrell CC, 2022, ‘Toughening Mechanisms in Mullite-Based Composites’, in Toughened Composites, CRC Press, pp. 151 – 164, http://dx.doi.org/10.1201/9780429330575-11
 
Hanaor DAH; Koshy P; Sorrell CC, 2020, ‘Phase stability and transformations in TIO2’, in Rutile: Properties, Synthesis and Applications, pp. 11 – 28
 
Sorrell CC; Koshy P, 2019, ‘Production Levels of Bauxite and Aluminum: Global Historical Survey (1850-2015)’, in Totten GE; Tiryakioglu M; Kessler O (ed.), ENCYCLOPEDIA OF ALUMINUM AND ITS ALLOYS, VOLS I AND II, CRC PRESS-TAYLOR & FRANCIS GROUP, pp. 2013 – 2039, http://dx.doi.org/10.1201/9781351045636-140000281
 
Bianchi CL; Pirola C; Stucchi M; Cerrato G; Galli F; Di Michele A; Biella S; Chen WF; Koshy P; Sorrell CC; Capucci V, 2018, ‘Photocatalytic TiO2: From Airless Jet Spray Technology to Digital Inkjet Printing’, in Yang D (ed.), Titanium Dioxide – Material for a Sustainable Environment, IntechOpen, pp. 261 – 279, http://dx.doi.org/10.5772/intechopen.72790
 
Hanaor DAH; Koshy P; Sorrell CC, 2012, ‘Phase Stability and Transformations in TiO2’, in Low J (ed.), Rutile: Properties, Synthesis and Applications, Nova Science Publishers, Hauppauge, NY, pp. 11 – 28

Motamedi M; Zheng X; Koshy P; & Taylor RA, 2024, ‘Synthesis and thermophysical property characterization of aqueous graphene quantum dot dispersions for air-conditioning applications’, Carbon Trends, https://doi.org/10.1016/j.cartre.2024.100372

Wang Y; Arandiyan H; Mofarah SS; Shen X; Bartlett SA; Koshy P; Sorrell CC; Sun H; Pozo‐Gonzalo C; Dastafkan K; Britto S; Bhargava SK; Zhao C, 2024, ‘Stacking Fault‐Enriched MONI4/MOO2 enables High‐Performance hydrogen evolution’, Advanced Materials, https://doi.org/10.1002/adma.202402156

Bahmanrokh G; Whitelock E; Dayal P; Farzana R; Koshy P; Gregg DJ, 2024, ‘Candidate glass–ceramic wasteforms for the immobilisation of Cs-loaded IONSIV® wastes: A scoping study’, MRS Advances, http://dx.doi.org/10.1557/s43580-024-00830-3

 
Ghasemian MB; Zavabeti A; Allioux FM; Sharma P; Mousavi M; Rahim MA; Khayyam Nekouei R; Tang J; Christofferson AJ; Meftahi N; Rafiezadeh S; Cheong S; Koshy P; Tilley RD; McConville CF; Russo SP; Ton-That C; Seidel J; Kalantar-Zadeh K, 2024, ‘Liquid Metal Doping Induced Asymmetry in Two-Dimensional Metal Oxides’, Small, http://dx.doi.org/10.1002/smll.202309924
 
Johnson KK; Koshy P; Kopecky C; Devadason M; Biazik J; Zheng X; Jiang Y; Wang X; Liu Y; Holst J; Yang JL; Kilian KA; Sorrell CC, 2024, ‘ROS-mediated anticancer effects of EGFR-targeted nanoceria’, Journal of Biomedical Materials Research – Part A, 112, pp. 754 – 769, http://dx.doi.org/10.1002/jbm.a.37656
 
Liu Z; Ma H; Sorrell CC; Koshy P; Wang B; Hart JN, 2024, ‘Enhancement of light absorption and oxygen vacancy formation in CeO2 by transition metal doping: A DFT study’, Applied Catalysis A: General, 670, http://dx.doi.org/10.1016/j.apcata.2023.119544
 
Mann J; Farzana R; Aughterson RD; Dayal P; Sorrell CC; Koshy P; Gregg DJ, 2024, ‘Characterisation of hot isostatically pressed (HIPed) hollandite wasteform-canister interaction zone’, Journal of Nuclear Materials, 589, http://dx.doi.org/10.1016/j.jnucmat.2023.154863
 
Alipal J; Saidin S; Lo AZK; Koshy P; Abdullah HZ; Idris MI; Lee TC, 2023, ‘In vitro surface efficacy of CaP-based anodised titanium for bone implants’, Surfaces and Interfaces, 39, http://dx.doi.org/10.1016/j.surfin.2023.102872
 
Bhattacharyya D; Thompson M; Hoang C; Koshy P; Corr C, 2023, ‘Effect of He Plasma Exposure on Recrystallization Behaviour and Mechanical Properties of Exposed W Surfaces—An EBSD and Nanoindentation Study’, Metals, 13, http://dx.doi.org/10.3390/met13091582
 
De Villenoisy T; Ho N; Chen S; Zheng X; Sorrell CC; Zhang Y; Koshy P, 2023, ‘Elucidating the role of synthesis conditions on Zr-MOF properties and yield’, Materials Chemistry and Physics, 309, http://dx.doi.org/10.1016/j.matchemphys.2023.128448
 
De Villenoisy T; Zheng X; Wong V; Mofarah SS; Arandiyan H; Yamauchi Y; Koshy P; Sorrell CC, 2023, ‘Principles of Design and Synthesis of Metal Derivatives from MOFs (Adv. Mater. 24/2023)’, Advanced Materials, 35, http://dx.doi.org/10.1002/adma.202370174
 
De Villenoisy T; Zheng X; Wong V; Mofarah SS; Arandiyan H; Yamauchi Y; Koshy P; Sorrell CC, 2023, ‘Principles of Design and Synthesis of Metal Derivatives from MOFs’, Advanced Materials, 35, http://dx.doi.org/10.1002/adma.202210166
 
Farzana R; Dayal P; Peristyy A; Sutton P; Aly Z; Aughterson RD; Nguyen TH; Yeoh M; Koshy P; Gregg DJ, 2023, ‘Effect of Ti-metal addition on hot-isostatically pressed (HIPed) Synroc-C’, Journal of the American Ceramic Society, 106, pp. 6971 – 6986, http://dx.doi.org/10.1111/jace.19313
 
Jayasekara AS; Brooks B; Steel K; Koshy P; Hockings K; Tahmasebi A, 2023, ‘Microalgae blending for sustainable metallurgical coke production – Impacts on coking behaviour and coke quality’, Fuel, 344, http://dx.doi.org/10.1016/j.fuel.2023.128130
 
Jiang Y; Toe CY; Mofarah SS; Cazorla C; Chang SLY; Yin Y; Zhang Q; Lim S; Yao Y; Tian R; Wang Y; Zaman T; Arandiyan H; Andersson GG; Scott J; Koshy P; Wang D; Sorrell CC, 2023, ‘Efficient Cocatalyst-Free Piezo-Photocatalytic Hydrogen Evolution of Defective BaTiO3-x Nanoparticles from Seawater’, ACS Sustainable Chemistry and Engineering, 11, pp. 3370 – 3389, http://dx.doi.org/10.1021/acssuschemeng.2c06573
 
Jiang Y; Zhou S; Mofarah SS; Niu R; Sun Y; Rawal A; Ma H; Xue K; Fang X; Toe CY; Chen WF; Chen YS; Cairney JM; Rahman R; Chen Z; Koshy P; Wang D; Sorrell CC, 2023, ‘Efficient and stable piezo-photocatalytic splitting of water and seawater by interfacial engineering of Na0.5Bi0.5TiO3/Na0.5Bi4.5Ti4O15 self-generated heterojunctions’, Nano Energy, 116, http://dx.doi.org/10.1016/j.nanoen.2023.108830
 
K. Johnson K; Kopecky C; Koshy P; Liu Y; Devadason M; Holst J; A. Kilian K; C. Sorrell C, 2023, ‘Theranostic Activity of Ceria-Based Nanoparticles toward Parental and Metastatic Melanoma: 2D vs 3D Models’, ACS Biomaterials Science and Engineering, 9, pp. 1053 – 1065, http://dx.doi.org/10.1021/acsbiomaterials.2c01258
 
Leung BAY; Joe W; Mofarah SS; Sorrell CC; Abbasi R; Azadeh M; Arsecularatne JA; Koshy P, 2023, ‘Unveiling the mechanisms behind surface degradation of dental resin composites in simulated oral environments’, Journal of Materials Chemistry B, 11, pp. 7707 – 7720, http://dx.doi.org/10.1039/d3tb00756a
 
Luo Y; Zheng X; Vutukuri CV; Ho N; Atanacio AJ; Manohar M; Arandiyan H; Wang Y; Sorrell CC; S. Mofarah S; Koshy P, 2023, ‘Tailored Fabrication of Defect-Rich Ion Implanted CeO2-x Nanoflakes for Electrochemical Sensing of H2O2’, Journal of the Electrochemical Society, 170, http://dx.doi.org/10.1149/1945-7111/acd41f
 
Mao P; Arandiyan H; Mofarah SS; Koshy P; Pozo-Gonzalo C; Zheng R; Wang Z; Wang Y; Bhargava SK; Sun H; Shao Z; Liu Y, 2023, ‘A comprehensive review of cathode materials for Na-air batteries’, Energy Advances, 2, pp. 465 – 502, http://dx.doi.org/10.1039/d2ya00340f
 
Motamedi M; Jia G; Yao Y; Shanks K; Yousefi P; Hewakuruppu YL; Rafeie M; Lindner F; Patterson R; Christiansen S; Plentz J; Koshy P; Taylor RA, 2023, ‘Nanopatterned indium tin oxide as a selective coating for solar thermal applications’, Renewable Energy, 210, pp. 386 – 396, http://dx.doi.org/10.1016/j.renene.2023.04.020
 
Rahmatmand B; Tahmasebi A; Lomas H; Honeyands T; Koshy P; Hockings K; Jayasekara A, 2023, ‘A technical review on coke rate and quality in low-carbon blast furnace ironmaking’, Fuel, 336, http://dx.doi.org/10.1016/j.fuel.2022.127077
 
Tseng YF; Mofarah SS; Zheng X; Arandiyan H; Wang Y; Abbasi R; Gao Y; Sorrell CC; Koshy P, 2023, ‘Engineering of Micro-mesoporous two-dimensional CeO2-based heterojunction oxides for energy storage applications’, Surfaces and Interfaces, 42, http://dx.doi.org/10.1016/j.surfin.2023.103520
 
Wong V; Zheng X; Jiang Y; Mofarah SS; Sorrell CC; Koshy P, 2023, ‘2D-3D metal oxide heterojunction nanostructures for catalytic applications’, Materials Science in Semiconductor Processing, 163, http://dx.doi.org/10.1016/j.mssp.2023.107588
 
Xue K; Jiang Y; Mofarah SS; Doustkhah E; Zhou S; Zheng X; Huang S; Wang D; Sorrell CC; Koshy P, 2023, ‘Composition-driven morphological evolution of BaTiO3 nanowires for efficient piezocatalytic hydrogen production’, Chemosphere, 338, http://dx.doi.org/10.1016/j.chemosphere.2023.139337
 
Zhang L; Fan H; Dang Y; Zhuang Q; Arandiyan H; Wang Y; Cheng N; Sun H; Pérez Garza HH; Zheng R; Wang Z; S. Mofarah S; Koshy P; Bhargava SK; Cui Y; Shao Z; Liu Y, 2023, ‘Recent advances in in situ and operando characterization techniques for Li7La3Zr2O12-based solid-state lithium batteries’, Materials Horizons, 10, pp. 1479 – 1538, http://dx.doi.org/10.1039/d3mh00135k
 
Abbasi R; Tang J; Baharfar M; Zhang C; Allioux FM; Zhang J; Tajik M; Yang J; Biazik J; Centurion F; Han J; Mofarah SS; Esrafilzadeh D; Koshy P; Sorrell CC; Chan SLI; Rahim MA; Kalantar-Zadeh K, 2022, ‘Induction heating for the removal of liquid metal-based implant mimics: A proof-of-concept’, Applied Materials Today, 27, http://dx.doi.org/10.1016/j.apmt.2022.101459
 
Amaldoss MJN; Mehmood R; Yang JL; Koshy P; Kumar N; Unnikrishnan A; Sorrell CC, 2022, ‘Anticancer therapeutic effect of cerium-based nanoparticles: known and unknown molecular mechanisms’, Biomaterials Science, 10, pp. 3671 – 3694, http://dx.doi.org/10.1039/d2bm00334a
 
Amaldoss MJN; Pandzic E; Koshy P; Kumar N; Sorrell CC; Unnikrishnan A, 2022, ‘Detection and quantification of nanoparticle-induced intracellular ROS in live cells by laser scanning confocal microscopy’, Methods, 207, pp. 11 – 19, http://dx.doi.org/10.1016/j.ymeth.2022.08.005
 
Amaldoss MJN; Yang JL; Koshy P; Unnikrishnan A; Sorrell CC, 2022, ‘Inorganic nanoparticle-based advanced cancer therapies: Promising combination strategies’, Drug Discovery Today, 27, http://dx.doi.org/10.1016/j.drudis.2022.103386
 
Fan H; Mao P; Sun H; Wang Y; Mofarah SS; Koshy P; Arandiyan H; Wang Z; Liu Y; Shao Z, 2022, ‘Recent advances of metal telluride anodes for high-performance lithium/sodium-ion batteries’, Materials Horizons, 9, pp. 524 – 546, http://dx.doi.org/10.1039/d1mh01587g
 
Idrus-Saidi SA; Tang J; Lambie S; Han J; Mayyas M; Ghasemian MB; Allioux FM; Cai S; Koshy P; Mostaghimi P; Steenbergen KG; Barnard AS; Daeneke T; Gaston N; Kalantar-Zadeh K, 2022, ‘Liquid metal synthesis solvents for metallic crystals’, Science, 378, pp. 1118 – 1124, http://dx.doi.org/10.1126/science.abm2731
 
Khosravanihaghighi A; Koshy P; Bahmanrokh G; Sorrell CC, 2022, ‘Solid solubility and charge compensation/exchange mechanisms in Ga- or Mn-Doped CeO2 thin films on 3D printed biomedical titanium alloy’, Materials Chemistry and Physics, 277, pp. 125483, http://dx.doi.org/10.1016/j.matchemphys.2021.125483
 
Khosravanihaghighi A; Koshy P; Yasir M; Romanazzo S; Lovric V; Kilian KA; Willcox MD; Walsh WR; Sorrell CC, 2022, ‘Production of Antibacterial Activity and Bone Cell Proliferation by Surface Engineering of Ga- or Mn-Doped Ceria-Coated Biomedical Titanium Alloy’, Advanced Engineering Materials, 24, http://dx.doi.org/10.1002/adem.202200077
 
Lui FHY; Xu L; Michaux P; Biazik J; Harm GFS; Oliver RA; Koshy P; Walsh WR; Mobbs RJ; Brennan‐Speranza TC; Wang Y; You L; Sorrell CC, 2022, ‘Microfluidic device with a carbonate‐rich hydroxyapatite micro‐coating’, Nano Select, 3, pp. 1321 – 1336, http://dx.doi.org/10.1002/nano.202200102
 
Ma H; Liu Z; Koshy P; Sorrell CC; Hart JN, 2022, ‘Density Functional Theory Investigation of the Biocatalytic Mechanisms of pH-Driven Biomimetic Behavior in CeO2’, ACS Applied Materials and Interfaces, 14, pp. 11937 – 11949, http://dx.doi.org/10.1021/acsami.1c24686
 
Mehmood R; J. N. Amaldoss M; Mofarah SS; Zheng Q; Kaushik NK; Ariotti N; Rawal A; Yang JL; Koshy P; Sorrell CC, 2022, ‘Green stealth engineering of lifetime-biocatalytic nanocatalyst’, Applied Surface Science, 572, http://dx.doi.org/10.1016/j.apsusc.2021.151464
 
Pachuta KG; Zheng X; Mofarah SS; Sorrell CC; Tsounis C; Scott JA; Sehirlioglu A; Pentzer EB; Koshy P, 2022, ‘Engineering Multifunctional Stratified LiCoO2Catalysts: Structural Disorder to Microstructural Exfoliation’, ACS Applied Energy Materials, 5, pp. 14290 – 14300, http://dx.doi.org/10.1021/acsaem.2c02846
 
Pignatta G; Wong V; Koshy P; Sorrell CC, 2022, ‘Can geopolymer materials be optimized for sustainable building envelope applications? A preliminary development and characterization study’, Environmental Sciences Proceedings, 12, pp. 11, http://dx.doi.org/10.3390/environsciproc2021012011
 
Rahim MA; Tang J; Christofferson AJ; Kumar PV; Meftahi N; Centurion F; Cao Z; Tang J; Baharfar M; Mayyas M; Allioux FM; Koshy P; Daeneke T; McConville CF; Kaner RB; Russo SP; Kalantar-Zadeh K, 2022, ‘Low-temperature liquid platinum catalyst’, Nature Chemistry, 14, pp. 935 – 941, http://dx.doi.org/10.1038/s41557-022-00965-6
 
Xu Y; Koshy P; Mofarah SS; Sorrell CC, 2022, ‘Morphological Mapping of Hydrothermally Synthesised Nanoceria at High Ce Concentrations’, ChemNanoMat, 8, http://dx.doi.org/10.1002/cnma.202200132
 
Alipal J; Lee TC; Koshy P; Abdullah HZ; Idris MI, 2021, ‘Evolution of anodised titanium for implant applications’, Heliyon, 7, http://dx.doi.org/10.1016/j.heliyon.2021.e07408
 
Alipal J; Lee TC; Koshy P; Abdullah HZ; Idris MI, 2021, ‘Influence of altered Ca-P based electrolytes on the anodised titanium bioactivity’, Surface and Coatings Technology, 412, http://dx.doi.org/10.1016/j.surfcoat.2021.127041
 
Amin ML; Mawad D; Dokos S; Koshy P; Martens PJ; Sorrell CC, 2021, ‘Fucoidan- and carrageenan-based biosynthetic poly(vinyl alcohol) hydrogels for controlled permeation’, Materials Science and Engineering C, 121, http://dx.doi.org/10.1016/j.msec.2020.111821
 
Bhuiyan A; Wong V; Abraham JL; Aughterson RD; Kong L; Farzana R; Gregg DJ; Sorrell CC; Zhang Y; Koshy P, 2021, ‘Phase assemblage and microstructures of Gd2Ti2-xZrxO7 (x = 0.1–0.3) pyrochlore glass-ceramics as potential waste forms for actinide immobilization’, Materials Chemistry and Physics, 273, http://dx.doi.org/10.1016/j.matchemphys.2021.125058
 
Chen A; Chen WF; Majidi T; Pudadera B; Atanacio A; Manohar M; Sheppard LR; Liu R; Sorrell CC; Koshy P, 2021, ‘Mo-doped, Cr-Doped, and Mo–Cr codoped TiO2 thin-film photocatalysts by comparative sol-gel spin coating and ion implantation’, International Journal of Hydrogen Energy, 46, pp. 12961 – 12980, http://dx.doi.org/10.1016/j.ijhydene.2021.01.136
 
Chen WF; Malacco CMDS; Mehmood R; Johnson KK; Yang JL; Sorrell CC; Koshy P, 2021, ‘Impact of morphology and collagen-functionalization on the redox equilibria of nanoceria for cancer therapies’, Materials Science and Engineering C, 120, http://dx.doi.org/10.1016/j.msec.2020.111663
 
Cheung KH; Pabbruwe MB; Chen WF; Koshy P; Sorrell CC, 2021, ‘Thermodynamic and microstructural analyses of photocatalytic TiO2 from the anodization of biomedical-grade Ti6Al4V in phosphoric acid or sulfuric acid’, Ceramics International, 47, pp. 1609 – 1624, http://dx.doi.org/10.1016/j.ceramint.2020.08.277
 
Jiang Y; Chen WF; Ma H; Ren H; Lim S; Lu X; Bahmanrokh G; Mofarah SS; Wang D; Koshy P; Sorrell CC; Seifi Mofarah S, 2021, ‘Effect of Bi/Ti ratio on (Na0.5Bi0.5)TiO3/Bi4Ti3O12 heterojunction formation and photocatalytic performance’, Journal of Environmental Chemical Engineering, 9, pp. 106532, http://dx.doi.org/10.1016/j.jece.2021.106532
 
Jiang Y; Mofarah SS; Koshy P; Chen WF; Fang X; Zheng X; Wang D; Sorrell CC, 2021, ‘Na0.5Bi0.5TiO3 phase relations: Thermodynamics and phase equilibria in the systems Bi2O3 – TiO2, Na2O – TiO2, and Na2O – Bi2O3 – TiO2’, Journal of the European Ceramic Society, 41, pp. 7005 – 7013, http://dx.doi.org/10.1016/j.jeurceramsoc.2021.07.048
 
Johnson KK; Koshy P; Yang JL; Sorrell CC, 2021, ‘Preclinical Cancer Theranostics—From Nanomaterials to Clinic: The Missing Link’, Advanced Functional Materials, 31, http://dx.doi.org/10.1002/adfm.202104199
 
Kabir II; Sheppard LR; Shahmiri R; Koshy P; Liu R; Joe W; Le A; Lu X; Chen WF; Sorrell CC, 2021, ‘Correction to: Contamination of TiO2 thin films spin coated on borosilicate and rutile substrates (Journal of Materials Science, (2020), 55, 9, (3774-3794), 10.1007/s10853-019-04282-1)’, Journal of Materials Science, 56, pp. 18341 – 18343, http://dx.doi.org/10.1007/s10853-021-06474-0
 
Kabir II; Sheppard LR; Shahmiri R; Liu R; Le A; Lu X; Hanaor D; Chen WF; Koshy P; Sorrell CC, 2021, ‘Correction to: Contamination of TiO2 thin films spin coated on rutile and soda–lime–silica substrates (Journal of Materials Science, (2020), 55, 19, (8061-8087), 10.1007/s10853-020-04592-9)’, Journal of Materials Science, 56, pp. 17874 – 17875, http://dx.doi.org/10.1007/s10853-021-06475-z
 
Koshy P; Ho N; Zhong V; Schreck L; Koszo SA; Severin EJ; Sorrell CC, 2021, ‘Fly ash utilisation in mullite fabrication: Development of novel percolated mullite’, Minerals, 11, pp. 1 – 17, http://dx.doi.org/10.3390/min11010084
 
Lui FHY; Mobbs RJ; Wang Y; Koshy P; Lucien FP; Zhou D; Sorrell CC, 2021, ‘Dynamic Mineralization: Low-Temperature, Rapid, and Multidirectional Process to Encapsulate Polyether-Ether-Ketone with Carbonate-Rich Hydroxyapatite for Osseointegration (Adv. Mater. Interfaces 15/2021)’, ADVANCED MATERIALS INTERFACES, 8, http://dx.doi.org/10.1002/admi.202170083
 
Lui FHY; Mobbs RJ; Wang Y; Koshy P; Lucien FP; Zhou D; Sorrell CC, 2021, ‘Dynamic Mineralization: Low-Temperature, Rapid, and Multidirectional Process to Encapsulate Polyether-Ether-Ketone with Carbonate-Rich Hydroxyapatite for Osseointegration’, Advanced Materials Interfaces, 8, http://dx.doi.org/10.1002/admi.202100333
 
Lui FHY; Wang Y; Yao Y; Mobbs RJ; Pogson RE; Koshy P; Lucien FP; Zhou D; Sorrell CC, 2021, ‘Quiescent Mineralisation for Free-standing Mineral Microfilms with a Hybrid Structure’, Journal of Colloid and Interface Science, 604, pp. 327 – 339, http://dx.doi.org/10.1016/j.jcis.2021.06.171
 
Mofarah SS; Schreck L; Cazorla C; Zheng X; Adabifiroozjaei E; Tsounis C; Scott J; Shahmiri R; Yao Y; Abbasi R; Wang Y; Arandiyan H; Sheppard L; Wong V; Doustkhah E; Koshy P; Sorrell CC, 2021, ‘Highly catalytically active CeO2-: X-based heterojunction nanostructures with mixed micro/meso-porous architectures’, Nanoscale, 13, pp. 6764 – 6771, http://dx.doi.org/10.1039/d0nr08097g
 
Sarmadi N; Gharabaghi M; Tamadoni Saray M; Darestani M; Garman D; Koshy P; S. Mofarah S; Sorrell CC, 2021, ‘Highly Mesoporous Hybrid Transition Metal Oxide Nanowires for Enhanced Adsorption of Rare Earth Elements from Wastewater’, Inorganic Chemistry, 60, pp. 175 – 184, http://dx.doi.org/10.1021/acs.inorgchem.0c02762
 
Ukritnukun S; Koshy P; Feng C; Rawal A; Castel A; Sorrell CC, 2021, ‘Development of low-alkali, fly ash/slag geopolymers: Predictive strength modelling and analyses of impact of curing temperatures’, Minerals, 11, pp. 1 – 24, http://dx.doi.org/10.3390/min11010060
 
Wong V; Jervis W; Fishburn B; Numata T; Joe W; Rawal A; Sorrell CC; Koshy P, 2021, ‘Long-term strength evolution in ambient-cured solid-activator geopolymer compositions’, Minerals, 11, pp. 1 – 22, http://dx.doi.org/10.3390/min11020143
 
Xu Y; Mofarah SS; Mehmood R; Cazorla C; Koshy P; Sorrell CC, 2021, ‘Design strategies for ceria nanomaterials: Untangling key mechanistic concepts’, Materials Horizons, 8, pp. 102 – 123, http://dx.doi.org/10.1039/d0mh00654h
 
Yeoh MLY; Ukritnukun S; Rawal A; Davies J; Kang BJ; Burrough K; Aly Z; Dayal P; Vance ER; Gregg DJ; Koshy P; Sorrell CC, 2021, ‘Mechanistic impacts of long-term gamma irradiation on physicochemical, structural, and mechanical stabilities of radiation-responsive geopolymer pastes’, Journal of Hazardous Materials, 407, http://dx.doi.org/10.1016/j.jhazmat.2020.124805
 
Zheng X; Mofarah SS; Cazorla C; Daiyan R; Esmailpour AA; Scott J; Yao Y; Lim S; Wong V; Chen EY; Arandiyan H; Koshy P; Sorrell CC, 2021, ‘Decoupling the Impacts of Engineering Defects and Band Gap Alignment Mechanism on the Catalytic Performance of Holey 2D CeO2−x-Based Heterojunctions’, Advanced Functional Materials, 31, http://dx.doi.org/10.1002/adfm.202103171
 
Zheng X; Mofarah SS; Cen A; Cazorla C; Haque E; Chen EY; Atanacio AJ; Manohar M; Vutukuri C; Abraham JL; Koshy P; Sorrell CC, 2021, ‘Role of Oxygen Vacancy Ordering and Channel Formation in Tuning Intercalation Pseudocapacitance in Mo Single-Ion-Implanted CeO2–x Nanoflakes’, ACS Applied Materials and Interfaces, 13, pp. 59820 – 59833, http://dx.doi.org/10.1021/acsami.1c14484
 
Abotar E; Dankwah JB; Koshy P; Dankwah JR, 2020, ‘Production of Metallic Iron from the Pudo Magnetite Ore using End-of-Life Rubber Tyre as Reductant: The Role of an Underlying Ankerite Ore as a Fluxing Agent on Productivity’, Ghana Mining Journal, 20, pp. 36 – 42, http://dx.doi.org/10.4314/gm.v20i2.5
 
Allioux FM; Merhebi S; Tang J; Idrus-Saidi SA; Abbasi R; Saborio MG; Ghasemian MB; Han J; Namivandi-Zangeneh R; O’Mullane AP; Koshy P; Daiyan R; Amal R; Boyer C; Kalantar-Zadeh K, 2020, ‘Catalytic Metal Foam by Chemical Melting and Sintering of Liquid Metal Nanoparticles’, Advanced Functional Materials, 30, http://dx.doi.org/10.1002/adfm.201907879
 
Amin ML; Mawad D; Dokos S; Koshy P; Martens PJ; Sorrell CC, 2020, ‘Immunomodulatory properties of photopolymerizable fucoidan and carrageenans’, Carbohydrate Polymers, 230, http://dx.doi.org/10.1016/j.carbpol.2019.115691
 
Bahmanrokh G; Cazorla C; Mofarah SS; Shahmiri R; Yao Y; Ismail I; Chen WF; Koshy P; Sorrell CC, 2020, ‘Band gap engineering of Ce-doped anatase TiO2 through solid solubility mechanisms and new defect equilibria formalism’, Nanoscale, 12, pp. 4916 – 4934, http://dx.doi.org/10.1039/c9nr08604h
 
Chen WF; Chen H; Bahmanrokh G; Koshy P; Nakaruk A; Sorrell CC, 2020, ‘Synergistic effect of Co + Mo codoping on the photocatalytic performance of titania thin films’, International Journal of Hydrogen Energy, 45, pp. 24558 – 24566, http://dx.doi.org/10.1016/j.ijhydene.2020.06.017
 
Cheung KH; Pabbruwe MB; Chen WF; Koshy P; Sorrell CC, 2020, ‘Effects of substrate preparation on TiO2 morphology and topography during anodization of biomedical Ti6Al4V’, Materials Chemistry and Physics, 252, http://dx.doi.org/10.1016/j.matchemphys.2020.123224
 
Dai X; Koshy P; Sorrell CC; Lim J; Yun JS, 2020, ‘Focussed review of utilization of graphene-based materials in electron transport layer in halide perovskite solar cells: Materials-based issues’, Energies, 13, http://dx.doi.org/10.3390/en13236335
 
Kabir II; Sheppard LR; Shahmiri R; Liu R; Le A; Lu X; Hanaor D; Chen WF; Koshy P; Sorrell CC, 2020, ‘Contamination of TiO2 thin films spin coated on rutile and soda–lime–silica substrates’, Journal of Materials Science, 55, pp. 8061 – 8087, http://dx.doi.org/10.1007/s10853-020-04592-9
 
Kabir II; Sheppard LR; Shamiri R; Koshy P; Liu R; Joe W; Le A; Lu X; Chen WF; Sorrell CC, 2020, ‘Contamination of TiO2 thin films spin coated on borosilicate and rutile substrates’, Journal of Materials Science, 55, pp. 3774 – 3794, http://dx.doi.org/10.1007/s10853-019-04282-1
 
Li H; Abbasi R; Wang Y; Allioux FM; Koshy P; Idrus-Saidi SA; Rahim MA; Yang J; Mousavi M; Tang J; Ghasemian MB; Jalili R; Kalantar-Zadeh K; Mayyas M, 2020, ‘Liquid metal-supported synthesis of cupric oxide’, Journal of Materials Chemistry C, 8, pp. 1656 – 1665, http://dx.doi.org/10.1039/c9tc06883j
 
Ma H; Ren H; Koshy P; Sorrell CC; Hart JN, 2020, ‘Enhancement of CeO2 Silanization by Spontaneous Breakage of Si-O Bonds through Facet Engineering’, Journal of Physical Chemistry C, 124, pp. 2644 – 2655, http://dx.doi.org/10.1021/acs.jpcc.9b08406
 
Nimako KO; Dwumfour A; Mensah K; Koshy P; Dankwah JR, 2020, ‘Calcination Behaviour of Nsuta Rhodochrosite Ore in the Presence and Absence of End-of-Life High Density Polyethylene’, Ghana Mining Journal, 20, pp. 27 – 35, http://dx.doi.org/10.4314/gm.v20i2.4
 
Ren H; Koshy P; Cao F; Sorrell CC, 2020, ‘Erratum: Multivalence Charge Transfer in Doped and Codoped Photocatalytic TiO2 (Inorganic Chemistry (2016) 55:16 (8071−8081) DOI: 10.1021/acs.inorgchem.6b01200)’, Inorganic Chemistry, 59, pp. 956, http://dx.doi.org/10.1021/acs.inorgchem.9b03573
 
S. Mofarah S; Adabifiroozjaei E; Wang Y; Arandiyan H; Pardehkhorram R; Yao Y; Assadi MHN; Mehmood R; Chen WF; Tsounis C; Scott J; Lim S; Webster R; Zhong V; Xu Y; Koshy P; Sorrell CC, 2020, ‘Assembly of cerium-based coordination polymer into variant polycrystalline 2D-3D CeO2-x nanostructures’, Journal of Materials Chemistry A, 8, pp. 4753 – 4763, http://dx.doi.org/10.1039/c9ta11961b
 
Saborio MG; Cai S; Tang J; Ghasemian MB; Mayyas M; Han J; Christoe MJ; Peng S; Koshy P; Esrafilzadeh D; Jalili R; Wang CH; Kalantar-Zadeh K, 2020, ‘Liquid Metal Droplet and Graphene Co-Fillers for Electrically Conductive Flexible Composites’, Small, 16, http://dx.doi.org/10.1002/smll.201903753
 
Shahrubudin N; Koshy P; Alipal J; Kadir MHA; Lee TC, 2020, ‘Challenges of 3D printing technology for manufacturing biomedical products: A case study of Malaysian manufacturing firms’, Heliyon, 6, http://dx.doi.org/10.1016/j.heliyon.2020.e03734
 
Ukritnukun S; Koshy P; Rawal A; Castel A; Sorrell CC, 2020, ‘Predictive model of setting times and compressive strengths for low-alkali, ambient-cured, fly ash/slag-based geopolymers’, Minerals, 10, pp. 1 – 21, http://dx.doi.org/10.3390/min10100920
 
Zhang X; Chen WF; Bahmanrokh G; Kumar V; Ho N; Koshy P; Sorrell CC, 2020, ‘Synthesis of V- and Mo-doped/codoped TiO2 powders for photocatalytic degradation of methylene blue’, Nano-Structures and Nano-Objects, 24, http://dx.doi.org/10.1016/j.nanoso.2020.100557
 
Adabifiroozjaei E; Koshy P; Emadi F; Mofarah SS; Ma H; Rastkerdar E; Lim S; Webster RF; Mitchell DRG; Sorrell CC; Seifi Mofarah S, 2019, ‘Ionic interdiffusion as interaction mechanism between Al and Si3N4’, Journal of the American Ceramic Society, 102, pp. 4835 – 4847, http://dx.doi.org/10.1111/jace.16358
 
Cui Y; Chen WF; Bastide A; Zhang X; Koshy P; Sorrell CC, 2019, ‘Effect of precursor dopant valence state on the photocatalytic performance of Mo3+– or Mo5+-Doped TiO2 thin films’, Journal of Physics and Chemistry of Solids, 126, pp. 314 – 321, http://dx.doi.org/10.1016/j.jpcs.2018.11.018
 
Dankwah JR; Baah EO; Dankwah JB; Dankwah J; Agbenuvor BS; Amankwaa-Kyeremeh B; Koshy P, 2019, ‘Production of Iron Nuggets from the Akpafu-Todzi Iron Ore and Artisanal Ferrous Slag using Post Consumer Thermosets (Waste Electrical Sockets) as Reductants’, Ghana Mining Journal, 19, pp. 41 – 49, http://dx.doi.org/10.4314/gm.v19i2.6
 
Idrus-Saidi SA; Tang J; Ghasemian MB; Yang J; Han J; Syed N; Daeneke T; Abbasi R; Koshy P; O’Mullane AP; Kalantar-Zadeh K, 2019, ‘Liquid metal core-shell structures functionalised via mechanical agitation: The example of Field’s metal’, Journal of Materials Chemistry A, 7, pp. 17876 – 17887, http://dx.doi.org/10.1039/c9ta05200c
 
Jiang Y; Chen WF; Koshy P; Sorrell CC, 2019, ‘Enhanced photocatalytic performance of nanostructured TiO2 thin films through combined effects of polymer conjugation and Mo-doping’, Journal of Materials Science, 54, pp. 5266 – 5279, http://dx.doi.org/10.1007/s10853-018-03271-0
 
Kumar V; Chen WF; Zhang X; Jiang Y; Koshy P; Sorrell CC, 2019, ‘Properties and performance of photocatalytic CeO2, TiO2, and CeO2–TiO2 layered thin films’, Ceramics International, 45, pp. 22085 – 22094, http://dx.doi.org/10.1016/j.ceramint.2019.07.225
 
Liu Z; Chen WF; Zhang X; Zhang J; Koshy P; Sorrell CC, 2019, ‘Structural and Microstructural Effects of Mo3+/Mo5+ Codoping on Properties and Photocatalytic Performance of Nanostructured TiO2 Thin Films’, Journal of Physical Chemistry C, 123, pp. 11781 – 11790, http://dx.doi.org/10.1021/acs.jpcc.9b02667
 
Liu Z; Sorrell CC; Koshy P; Hart JN, 2019, ‘DFT Study of Methanol Adsorption on Defect-Free CeO2 Low-Index Surfaces’, ChemPhysChem, 20, pp. 2074 – 2081, http://dx.doi.org/10.1002/cphc.201900583
 
Mehmood R; Mofarah SS; Chen WF; Koshy P; Sorrell CC, 2019, ‘Surface, Subsurface, and Bulk Oxygen Vacancies Quantified by Decoupling and Deconvolution of the Defect Structure of Redox-Active Nanoceria’, Inorganic Chemistry, 58, pp. 6016 – 6027, http://dx.doi.org/10.1021/acs.inorgchem.9b00330
 
Mehmood R; Mofarah SS; Rawal A; Tomasetig F; Wang X; Yang JL; Koshy P; Sorrell CC, 2019, ‘Green Synthesis of Zwitterion-Functionalized Nano-Octahedral Ceria for Enhanced Intracellular Delivery and Cancer Therapy’, ACS Sustainable Chemistry and Engineering, 7, pp. 9189 – 9201, http://dx.doi.org/10.1021/acssuschemeng.8b06726
 
Mittal D; Chen WF; Koshy P; Chen HK; Kabir I; Jiang Y; Liu Z; Sorrell CC, 2019, ‘Intervalence charge transfer and thermodynamic effects on the photocatalytic performance of Fe/Mo single and codoped TiO2 thin films’, SN Applied Sciences, 1, http://dx.doi.org/10.1007/s42452-019-0248-3
 
Mofarah SS; Adabifiroozjaei E; Pardehkhorram R; Assadi MHN; Hinterstein M; Yao Y; Liu X; Ghasemian MB; Kalantar-Zadeh K; Mehmood R; Cazorla C; Shahmiri R; Bahmanrokh G; Bhattacharyya S; Spadaro MC; Arbiol J; Lim S; Xu Y; Arandiyan H; Scott J; Koshy P; Sorrell CC, 2019, ‘Coordination Polymer to Atomically Thin, Holey, Metal-Oxide Nanosheets for Tuning Band Alignment’, Advanced Materials, 31, http://dx.doi.org/10.1002/adma.201905288
 
Mofarah SS; Adabifiroozjaei E; Pardehkhorram R; Assadi MHN; Hinterstein M; Yao Y; Liu X; Ghasemian MB; Kalantar‐Zadeh K; Mehmood R; Cazorla C; Shahmiri R; Bahmanrokh G; Bhattacharyya S; Spadaro MC; Arbiol J; Lim S; Xu Y; Arandiyan H; Scott J; Koshy P; Sorrell CC, 2019, ‘2D Materials: Coordination Polymer to Atomically Thin, Holey, Metal‐Oxide Nanosheets for Tuning Band Alignment (Adv. Mater. 52/2019)’, Advanced Materials, 31, http://dx.doi.org/10.1002/adma.201970370
 
Mohd Pu’ad NAS; Koshy P; Abdullah HZ; Idris MI; Lee TC, 2019, ‘Syntheses of hydroxyapatite from natural sources’, Heliyon, 5, http://dx.doi.org/10.1016/j.heliyon.2019.e01588
 
Motamedi M; Crisostomo F; Yao Y; Mofarah SS; Chen WF; Koshy P; Taylor RA; Seifi Mofarah S, 2019, ‘Single-layer, anti-reflective thin films of porous MgF2 for solar thermal applications’, Journal of Physics D: Applied Physics, 52, pp. 315501, http://dx.doi.org/10.1088/1361-6463/ab1f5e
 
Ren H; Dittrich T; Ma H; Hart JN; Fengler S; Chen S; Li Y; Wang Y; Cao F; Schieda M; Ng YH; Xie Z; Bo X; Koshy P; Sheppard LR; Zhao C; Sorrell CC, 2019, ‘Manipulation of Charge Transport by Metallic V 13 O 16 Decorated on Bismuth Vanadate Photoelectrochemical Catalyst’, Advanced Materials, 31, http://dx.doi.org/10.1002/adma.201807204
 
S. Mofarah S; Adabifiroozjaei E; Yao Y; Koshy P; Lim S; Webster R; Liu X; Khayyam Nekouei R; Cazorla C; Liu Z; Wang Y; Lambropoulos N; Sorrell CC, 2019, ‘Proton-assisted creation of controllable volumetric oxygen vacancies in ultrathin CeO2−x for pseudocapacitive energy storage applications’, Nature Communications, 10, http://dx.doi.org/10.1038/s41467-019-10621-2
 
Tang J; Daiyan R; Ghasemian MB; Idrus-Saidi SA; Zavabeti A; Daeneke T; Yang J; Koshy P; Cheong S; Tilley RD; Kaner RB; Amal R; Kalantar-Zadeh K; Idrus Saidi SA, 2019, ‘Advantages of eutectic alloys for creating catalysts in the realm of nanotechnology-enabled metallurgy’, Nature Communications, 10, pp. 4645, http://dx.doi.org/10.1038/s41467-019-12615-6
 
Adabifiroozjaei E; Hart JN; Koshy P; Mitchell DRG; Sorrell CC, 2018, ‘Mullite-glass and mullite-mullite interfaces: Analysis by molecular dynamics (MD) simulation and high-resolution TEM’, Journal of the American Ceramic Society, 101, pp. 428 – 439, http://dx.doi.org/10.1111/jace.15169
 
Chen WF; Chen H; Koshy P; Nakaruk A; Sorrell CC, 2018, ‘Effect of doping on the properties and photocatalytic performance of titania thin films on glass substrates: Single-ion doping with Cobalt or Molybdenum’, Materials Chemistry and Physics, 205, pp. 334 – 346, http://dx.doi.org/10.1016/j.matchemphys.2017.11.021
 
Doran N; Chen WF; Koshy P; Ho KKK; Kumar N; Sorrell CC, 2018, ‘Photocatalytic antimicrobial films on fluorinated contact lens polymers’, Materials Letters, 212, pp. 134 – 138, http://dx.doi.org/10.1016/j.matlet.2017.10.047
 
Hinterstein M; Mgbemere HE; Hoelzel M; Rheinheimer W; Adabifiroozjaei E; Koshy P; Sorrell CC; Hoffman M, 2018, ‘Influence of microstructure on symmetry determination of piezoceramics’, Journal of Applied Crystallography, 51, pp. 670 – 678, http://dx.doi.org/10.1107/S1600576718003916
 
Kabir II; Sheppard LR; Liu R; Yao Y; Zhu Q; Chen W-F; Koshy P; Sorrell CC, 2018, ‘Contamination of TiO2 thin films spin coated on rutile and fused silica substrates’, SURFACE & COATINGS TECHNOLOGY, 354, pp. 369 – 382, http://dx.doi.org/10.1016/j.surfcoat.2018.09.009
 
Koshy P; Koszo SA; Severin E; Sorrell CC, 2018, ‘High-performance refractory ceramics of percolated mullite from waste materials’, American Ceramic Society Bulletin, 97, pp. 29 – 34
 
Kwong WL; Koshy P; Hart JN; Xu W; Sorrell CC, 2018, ‘Critical role of {002} preferred orientation on electronic band structure of electrodeposited monoclinic WO3 thin films’, Sustainable Energy and Fuels, 2, pp. 2224 – 2236, http://dx.doi.org/10.1039/c8se00239h
 
Lee TC; Abdullah HZ; Koshy P; Idris MI, 2018, ‘Deposition of novel bioactive nanoflower-like sodium titanate on TiO2 coating via anodic oxidation for biomedical applications’, Materials Letters, 216, pp. 256 – 260, http://dx.doi.org/10.1016/j.matlet.2018.01.115
 
Lee TC; Abdullah HZ; Koshy P; Idris MI, 2018, ‘Ultraviolet-assisted biomimetic coating of bone-like apatite on anodised titanium for biomedical applications’, Thin Solid Films, 660, pp. 191 – 198, http://dx.doi.org/10.1016/j.tsf.2018.06.021
 
Liu Z; Li X; Mayyas M; Koshy P; Hart JN; Sorrell CC, 2018, ‘Planar-dependent oxygen vacancy concentrations in photocatalytic CeO2 nanoparticles’, CrystEngComm, 20, pp. 204 – 212, http://dx.doi.org/10.1039/c7ce01634d
 
Mehmood R; Ariotti N; Yang JL; Koshy P; Sorrell CC, 2018, ‘PH-Responsive Morphology-Controlled Redox Behavior and Cellular Uptake of Nanoceria in Fibrosarcoma’, ACS Biomaterials Science and Engineering, 4, pp. 1064 – 1072, http://dx.doi.org/10.1021/acsbiomaterials.7b00806
 
Mehmood R; Wang X; Koshy P; Yang JL; Sorrell CC, 2018, ‘Engineering oxygen vacancies through construction of morphology maps for bio-responsive nanoceria for osteosarcoma therapy’, CrystEngComm, 20, pp. 1536 – 1545, http://dx.doi.org/10.1039/c8ce00001h
 
Ren H; Wang J; Ma H; Cao F; Jiang Y; Koshy P; Sorrell CC, 2018, ‘Deconvolution of dopant-derived extrinsic and intrinsic effects in TiO2 nanoparticulate thin films’, New Journal of Chemistry, 42, pp. 19685 – 19691, http://dx.doi.org/10.1039/c8nj03083a
 
Ukritnukun S; Sorrell CC; Gregg D; Vance ER; Koshy P, 2018, ‘Potential Use of Ambient-Cured Geopolymers for Intermediate Level Nuclear Waste Storage’, MRS Advances, 3, pp. 1123 – 1131, http://dx.doi.org/10.1557/adv.2018.276
 
Wang J; Ren H; Chen WF; Koshy P; Sorrell CC, 2018, ‘Fabrication and photocatalytic performance of Sn-doped titania hollow spheres using polystyrene as template’, Ceramics International, 44, pp. 4981 – 4989, http://dx.doi.org/10.1016/j.ceramint.2017.12.092
 
2018, ‘Enhancement of Ce/Cr Codopant Solubility and Chemical Homogeneity in TiO2 Nanoparticles through Sol-Gel versus Pechini Syntheses’, http://dx.doi.org/10.1021/acs.inorgchem.8b00926
 
Adabifiroozjaei E; Ma H; Koshy P; Sorrell CC, 2017, ‘Anorthite (CaAl2Si2O8)–aluminum interface: kinetics of high-temperature interactions’, Journal of Materials Science, 52, pp. 6767 – 6777, http://dx.doi.org/10.1007/s10853-017-0913-0
 
Channei D; Phanichphant S; Nakaruk A; Mofarah SS; Koshy P; Sorrell CC; Seifi Mofarah S, 2017, ‘Aqueous and surface chemistries of photocatalytic Fe-doped CEO2 nanoparticles’, Catalysts, 7, pp. 45, http://dx.doi.org/10.3390/catal7020045
 
Chung L; Chen WF; Koshy P; Sorrell CC, 2017, ‘Effect of Ce-doping on the photocatalytic performance of TiO2 thin films’, Materials Chemistry and Physics, 197, pp. 236 – 239, http://dx.doi.org/10.1016/j.matchemphys.2017.05.037
 
Liu Z; Li X; Mayyas M; Koshy P; Hart JN; Sorrell CC, 2017, ‘Growth mechanism of ceria nanorods by precipitation at room temperature and morphology-dependent photocatalytic performance (vol 19, pg 4766, 2017)’, CRYSTENGCOMM, 19, pp. 5492 – 5492, http://dx.doi.org/10.1039/c7ce90142a
 
Liu Z; Li X; Mayyas M; Koshy P; Hart JN; Sorrell CC, 2017, ‘Growth mechanism of ceria nanorods by precipitation at room temperature and morphology-dependent photocatalytic performance’, CrystEngComm, 19, pp. 4766 – 4776, http://dx.doi.org/10.1039/c7ce00922d
 
Meng F; Gupta S; French D; Koshy P; Sorrell C; Shen Y, 2017, ‘Characterization of microstructure and strength of coke particles and their dependence on coal properties’, Powder Technology, 320, pp. 249 – 256, http://dx.doi.org/10.1016/j.powtec.2017.07.046
 
Meng F; Gupta S; Yu J; Jiang Y; Koshy P; Sorrell C; Shen Y, 2017, ‘Effects of kaolinite addition on the thermoplastic behaviour of coking coal during low temperature pyrolysis’, Fuel Processing Technology, 167, pp. 502 – 510, http://dx.doi.org/10.1016/j.fuproc.2017.08.005
 
Ren H; Koshy P; Chen WF; Qi S; Sorrell CC, 2017, ‘Photocatalytic materials and technologies for air purification’, Journal of Hazardous Materials, 325, pp. 340 – 366, http://dx.doi.org/10.1016/j.jhazmat.2016.08.072
 
Chen WF; Koshy P; Adler L; Sorrell CC, 2017, ‘Photocatalytic activity of V-doped TiO2 thin films for the degradation of methylene blue and rhodamine B dye solutions’, , http://dx.doi.org/10.1007/s41779-017-0068-0
 
Adabifiroozjaei E; Koshy P; Pardehkhorram R; Rastkerdar E; Hart J; Sorrell CC, 2016, ‘Interfacial Reactions Between BaAl2Si2O8 and Molten Al Alloy at 1423 K and 1523 K (1150 °C and 1250 °C)’, Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 47, pp. 1753 – 1764, http://dx.doi.org/10.1007/s11663-016-0642-9
 
Adabifiroozjaei E; Koshy P; Rastkerdar E; Ma H; Sorrell CC, 2016, ‘Interfacial reactions between Al7075 alloy and BaAl2Si2O8 + CaAl2Si2O8 mixture’, Philosophical Magazine, 96, pp. 3711 – 3734, http://dx.doi.org/10.1080/14786435.2016.1237784
 
Adabifiroozjaei E; Koshy P; Rastkerdar E; Sorrell CC, 2016, ‘Interfacial Reactions between Anorthite (CaAl2Si2O8) and Al 7075 Alloy at 850°C and 1150°C’, Journal of the American Ceramic Society, 99, pp. 1694 – 1708, http://dx.doi.org/10.1111/jace.14091
 
Bersani M; Paduano A; Favaro M; Koshy P; Sorrell CC; Martucci A; Granozzi G, 2016, ‘Preparation of high-porosity TiOxCy powders from a single templating carbon source’, Ceramics International, 42, pp. 7690 – 7696, http://dx.doi.org/10.1016/j.ceramint.2016.01.183
 
Channei D; Nakaruk A; Phanichphant S; Koshy P; Sorrell CC, 2016, ‘Effect of iron doping on the structural and optical properties of CeO2 films’, Journal of Sol-Gel Science and Technology, 79, pp. 51 – 58, http://dx.doi.org/10.1007/s10971-016-4028-x
 
Chen HK; Chen WF; Koshy P; Adabifiroozjaei E; Liu R; Sheppard LR; Sorrell CC, 2016, ‘Effect of tungsten-doping on the properties and photocatalytic performance of titania thin films on glass substrates’, Journal of the Taiwan Institute of Chemical Engineers, 67, pp. 202 – 210, http://dx.doi.org/10.1016/j.jtice.2016.07.016
 
Chen WF; Koshy P; Huang Y; Adabifiroozjaei E; Yao Y; Sorrell CC, 2016, ‘Effects of precipitation, liquid formation, and intervalence charge transfer on the properties and photocatalytic performance of cobalt- or vanadium-doped TiO2 thin films’, International Journal of Hydrogen Energy, 41, pp. 19025 – 19056, http://dx.doi.org/10.1016/j.ijhydene.2016.08.115
 
Chen WF; Koshy P; Sorrell CC, 2016, ‘Effects of film topology and contamination as a function of thickness on the photo-induced hydrophilicity of transparent TiO2 thin films deposited on glass substrates by spin coating’, Journal of Materials Science, 51, pp. 2465 – 2480, http://dx.doi.org/10.1007/s10853-015-9559-y
 
Chour A; Boussi A; Koshy P; Inglis C; Numata T; Sorrell CC, 2016, ‘Self-Cleaning Photocatalytic Coatings on Bricks and Tiles’, Journal of the Australian Ceramic Society, 52, pp. 21 – 28, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000367924100004&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a
 
Dankwah JR; Adjei-Kyeremeh F; Dwumah BK; Dankwah JB; Koshy P, 2016, ‘Microwave Production of Manganese from Manganese (IV) Oxide using Postconsumer Polypropylene as Reductant’, Ghana MIning Journal, 15, pp. 65 – 72, http://www.ajol.info/index.php/gm/article/view/127933
 
Dankwah JR; Gordon JJK; Koshy P, 2016, ‘Recycling Waste Electrical Socket as a Carbon Resource in Ironmaking’, Ghana Mining Journal, 16, pp. 76 – 76, http://dx.doi.org/10.4314/gm.v16i1.9
 
Dankwah JR; Gordon JJK; Koshy P, 2016, ‘Recycling Waste Electrical Socket as a Carbon Resource in Ironmaking’, Ghana Mining Journal, 16, pp. 76 – 76, http://dx.doi.org/10.4314/gmj.v16i1.9
 
Funayama N; Chen WF; Koshy P; Standard O, 2016, ‘Fabricating Photocatalytic Titania Thin Films on Nylon’, Journal of the Australian Ceramic Society, 52, pp. 14 – 20, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000367924100003&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a
 
Lee TC; Koshy P; Abdullah HZ; Idris MI, 2016, ‘Precipitation of bone-like apatite on anodised titanium in simulated body fluid under UV irradiation’, Surface and Coatings Technology, 301, pp. 20 – 28, http://dx.doi.org/10.1016/j.surfcoat.2015.11.010
 
Nguyen DD; Devlin LP; Koshy P; Sorrell CC, 2016, ‘Effects of acetic acid on early hydration of Portland cement’, Journal of Thermal Analysis and Calorimetry, 123, pp. 489 – 499, http://dx.doi.org/10.1007/s10973-015-4942-0
 
Nguyen DD; Devlin LP; Koshy P; Sorrell CC, 2016, ‘Effects of chemical nature of polyvinyl alcohol on early hydration of Portland cement’, Journal of Thermal Analysis and Calorimetry, 123, pp. 1439 – 1450, http://dx.doi.org/10.1007/s10973-015-5076-0
 
Ren H; Koshy P; Cao F; Sorrell CC, 2016, ‘Multivalence Charge Transfer in Doped and Codoped Photocatalytic TiO2’, Inorganic Chemistry, 55, pp. 8071 – 8081, http://dx.doi.org/10.1021/acs.inorgchem.6b01200
 
Adabifiroozjaei E; Koshy P; Pardehkhorram R; Rastkerdar E; Sorrell CC, 2015, ‘Interfacial Reactions between BaAl2Si2O8 and Molten Al Alloy at 850°C’, Journal of the American Ceramic Society, 98, pp. 3299 – 3307, http://dx.doi.org/10.1111/jace.13650
 
Adabifiroozjaei E; Koshy P; Sorrell CC, 2015, ‘Assessment of non-wetting materials for use in refractories for aluminium melting furnaces’, Journal of the Australian Ceramic Society, 51, pp. 139 – 145
 
Bersani M; Paduano A; Favaro M; Koshy P; Sorrell CC; Martucci A; Granozzi G, 2015, ‘Preparation of high-porosity TiOxCypowders from a single templating carbon source’, Ceramics International, http://dx.doi.org/10.1016/j.ceramint.2016.01.183
 
Chen WF; Chen H; Koshy P; Sorrell CC, 2015, ‘Photocatalytic performance of vanadium-doped and cobalt-doped Tio<inf>2</inf> thin film’, Journal of the Australian Ceramic Society, 51, pp. 1 – 8
 
Chen WF; Koshy P; Sorrell CC, 2015, ‘Effects of film topology and contamination as a function of thickness on the photo-induced hydrophilicity of transparent TiO2 thin films deposited on glass substrates by spin coating’, Journal of Materials Science, http://dx.doi.org/10.1007/s10853-015-9559-y
 
Cheung KH; Koshy P; Inglis C; Numata T; Sorrell CC, 2015, ‘Preliminary analysis of gas emissions during firing of clay bricks containing end-of-life rubber tyres’, Journal of the Australian Ceramic Society, 51, pp. 9 – 17
 
Cittadini M; Sturaro M; Guglielmi M; Resmini A; Tredici IG; Anselmi-Tamburini U; Koshy P; Sorrell CC; Martucci A, 2015, ‘ZnO nanorods grown on ZnO sol–gel seed films: Characteristics and optical gas-sensing properties’, Sensors and Actuators B: Chemical, 213, pp. 493 – 500, http://dx.doi.org/10.1016/j.snb.2015.03.002
 
Dhunna R; Koshy P; Sorrell CC, 2015, ‘Effect of iron doping on the mineralogical, microstructural, optical, and chemical properties of WO3 thin films’, Journal of the Australian Ceramic Society, 51, pp. 18 – 22
 
Kahram M; Asnavandi M; Koshy P; Sorrell CC, 2015, ‘Corrosion Investigation of Duplex Stainless Steels in Chlorinated Solutions’, Steel Research International, pp. n/a – n/a, http://dx.doi.org/10.1002/srin.201400293
 
Khanitchaidecha W; Nakaruk A; Koshy P; Futaba K, 2015, ‘Comparison of Simultaneous Nitrification and Denitrification for Three Different Reactors’, BioMed Research International, 2015, http://dx.doi.org/10.1155/2015/901508
 
Nguyen DD; Devlin LP; Koshy P; Sorrell CC, 2015, ‘Effect of polyvinyl alcohol on rheology of Portland cement pastes’, Journal of the Australian Ceramic Society, 51, pp. 23 – 28
 
Pandika K; Koshy P; Kit Ho KK; Kumar N; Sorrell CC, 2015, ‘Photocatalytic TiO2 thin films on fluorinated ethylene propylene copolymer (FEP) substrates’, Journal of the Australian Ceramic Society, 51, pp. 160 – 170
 
Pardehkhorram R; Tajarodi A; Imani M; Ebrahimi S; Koshy P; Sorrell CC, 2015, ‘Simplified synthesis of Fe2(MoO4)3 nanoparticles by microwave-assisted combustion’, Journal of the Australian Ceramic Society, 51, pp. 94 – 98
 
Wang SY; Eroles E; Koshy P; Sorrell CC, 2015, ‘Investigation of failure of tile adhesive mortars subjected to prolonged water immersion’, Journal of the Australian Ceramic Society, 51, pp. 123 – 129
 
2015, ‘Effect of intervalence charge transfer on photocatalytic performance of cobalt- and vanadium-codoped TiO2 thin films’, , http://dx.doi.org/10.1016/j.ijhydene.2015.09.055
 
Dankwah JR; Koshy P; Sahajwalla V, 2014, ‘Reduction of FeO in EAF steelmaking slag by blends of metallurgical coke and end-of-life polyethylene terephthalate’, Ironmaking & Steelmaking, 41, pp. 401 – 409, http://dx.doi.org/10.1179/1743281213Y.0000000125
 
Dankwah JR; Koshy P, 2014, ‘Effect of HDPE addition on the Pre-reduction of Mn3O4 to MnO by Metallurgical Coke’, High Temperature Materials and Processes, 33, pp. 345 – 353, http://dx.doi.org/10.1515/htmp-2013-0069
 
Dankwah JR; Koshy P, 2014, ‘Reduction of FeO in EAF Steelmaking Slag by Blends of Metallurgical Coke and Waste Polypropylene’, High Temperature Materials and Processes, 33, pp. 107 – 114, http://dx.doi.org/10.1515/htmp-2013-0035
 
Khanitchaidecha1 W; Koshy P; Kamei T; Nakaruk A; Kazama F, 2014, ‘Evaluation of performance and microbial community of NH4-N and NO3-N bioreactors’, Journal of Microbial & Biochemical Technology., Article ID 901508, http://dx.doi.org/10.4172/1948-5948.S12-007
 
Lin MZ; Chen H; Chen W-F; Nakaruk A; Koshy P; Sorrell CC; Lin C-P, 2014, ‘Effect of single-cation doping and codoping with Mn and Fe on the photocatalytic performance of TiO2 thin films’, International Journal of Hydrogen Energy, 39, pp. 21500 – 21511, http://dx.doi.org/10.1016/j.ijhydene.2014.02.013
 
Nguyen DD; Devlin LP; Koshy P; Sorrell CC, 2014, ‘Impact of water-soluble cellulose ethers on polymer-modified mortars’, Journal of Materials Science, 49, pp. 923 – 951, http://dx.doi.org/10.1007/s10853-013-7732-8
 
Pham HC; Koshy P; Cox JM; Sorrell CC, 2014, ‘Effect of heat treatment temperature on properties of nanocrystalline, photoactive, titania, thin films on polymer and fused quartz’, Ceramic Engineering and Science Proceedings, 35, pp. 61 – 76, http://dx.doi.org/10.1002/9781119040323.ch7
 
Lin MZ; Chen H; Chen WF; Nakaruk A; Koshy P; Sorrell CC, 2014, ‘Effect of single-cation doping and codoping with Mn and Fe on the photocatalytic performance of TiO2 thin films’, , http://dx.doi.org/10.1016/j.ijhydene.2014.02.013
 
Adabifiroozjaei E; Koshy P; Sorrell CC, 2013, ‘Effects of AlPO4 Addition on the Corrosion Resistance of Andalusite-Based Low-Cement Castables with Molten Al-Alloy’, Journal of the European Ceramic Society, 33, pp. 1067 – 1075, http://dx.doi.org/10.1016/j.jeurceramsoc.2012.11.005
 
Dal martello E; Tranella G; Ostrovski O; Zhang ; Raaness O; Larsen RB; Tang K; Koshy P, 2013, ‘Trace Elements in the Si Furnace Part 1: Behaviour of impurities in quartz during reduction’, Metallurgical and Materials Transactions B – Process Metallurgy and Materials Processing Science, 44, pp. 233 – 243, http://dx.doi.org/10.1007/s11663-012-9717-4
 
Dal martello E; Tranella G; Ostrovski O; Zhang ; Raaness O; Larsen RB; Tang K; Koshy P, 2013, ‘Trace Elements in the Si Furnace, Part 2: Analysis of condensate in carbothermal reduction of quartz’, Metallurgical and Materials Transactions B – Process Metallurgy and Materials Processing Science, 44, pp. 244 – 251, http://dx.doi.org/10.1007/s11663-012-9720-9
 
Firoozjaei E; Koshy P; Sorrell CC, 2013, ‘Effects of V2O5 Addition on the Corrosion Resistance of Andalusite-Based Low-Cement Castables with Molten Al-Alloy’, Journal of the European Ceramic Society, 32, pp. 1463 – 1471, http://www.sciencedirect.com/science/article/pii/S0955221912000374
 
Khanitchaidecha W; Koshy P; Kamei T; Shakya M; Kazama F, 2013, ‘Investigation of the Effects of Hydrogenotrophic Denitrification and Anammox on the Improvement of the Quality of the Drinking Water Supply System’, Journal of Environmental Science and Health Part A – Toxic/Hazardous Substances and Environmental Engineering, 48, pp. 1533 – 1542, http://dx.doi.org/10.1080/10934529.2013.797249
 
2013, ‘Cerium Dioxide Thin Films Using Spin Coating’, http://dx.doi.org/10.1155/2013/579284
 
2013, ‘Photocatalytic Activity under Visible Light of Fe-Doped CeO2 Nanoparticles Synthesized by Flame Spray Pyrolysis’, http://dx.doi.org/10.1016/j.ceramint.2012.09.093
 
2013, ‘Tunable Photoelectrochemical Properties by Nanostructural Control in WO Thin Films Prepared by Carboxylic Acid-Assisted Electrodeposition’, http://dx.doi.org/10.1021/jp400499c
 
Kwong WL; Nakaruk A; Koshy P; Sorrell CC, 2013, ‘Photoelectrochemical properties of WO3 nanoparticulate thin films prepared by carboxylic acid-assisted electrodeposition‘, http://dx.doi.org/10.1016/j.tsf.2013.03.125
 
AdabiFiroozjaei ; Koshy P; Sorrell CC, 2012, ‘Effects of Different Boron Compounds on the Corrosion Resistance of Andalusite-Based Low-Cement Castables in Contact with Molten Al-Alloy’, Metallurgical and Materials Transactions B – Process Metallurgy and Materials Processing Science, 43, pp. 5 – 13, http://www.springerlink.com/content/dvm0645w52202814/
 
Dankwah J; Koshy P; O”kane P; Sahajwalla VH, 2012, ‘Reduction of FeO in EAF Steelmaking Slag by Blends of Metallurgical Coke and End-of-Life Tyre’, Steel Research International, 83, pp. 766 – 774, http://dx.doi.org/10.1002/srin.201200019
 
Kongkarat S; Khanna R; Koshy P; Sahajwalla VH; O Kane P, 2012, ‘Recycling Waste Polymers in EAF steelmaking: Influence of polymer composition on carbon/slag interactions’, ISIJ International, 52, pp. 385 – 393, http://dx.doi.org/10.2355/isijinternational.52.385
 
Nakaruk A; Lin CYW; Channei D; Koshy P; Sorrell CC, 2012, ‘Fe-Doped and Mn-Doped Titanium Dioxide Thin Films’, Journal of Sol – Gel Science and Technology, 61, pp. 175 – 178, http://dx.doi.org/10.1007/s10971-011-2607-4
 
Nakaruk A; Lin CYW; Koshy P; Sorrell CC, 2012, ‘Iron Doped Titania Thin Films Prepared by Spin Coating’, Advances in Applied Ceramics, 111, pp. 129 – 133, http://dx.doi.org/10.1179/1743676111Y.0000000065
 
2012, ‘Effect of Fe doping on TiO2 films prepared by spin coating’, , http://dx.doi.org/10.1016/j.ceramint.2012.01.047
 
2012, ‘Multivalent Mn-doped TiO2 thin films’, , http://dx.doi.org/10.1016/j.physe.2012.05.009
 
Adabifiroozjaei E; Koshy P; Rastkerdar , 2011, ‘Effect of Different Barium Compounds on the Corrosion Resistance of Andalusite-Based Low-Cement Castables in Contact with Molten Al-Alloy’, Metallurgical and Materials Transactions B – Process Metallurgy and Materials Processing Science, 42, pp. 901 – 913, http://dx.doi.org/10.1007/s11663-011-9522-5
 
Dankwah JR; Koshy P; Saha-Chaudhury NM; O Kane P; Skidmore C; Knights D; Sahajwalla VH, 2011, ‘Reduction of FeO in EAF steelmaking slag by metallurgical coke and waste plastics blends’, ISIJ International, 51, pp. 498 – 507, http://www.jstage.jst.go.jp/article/isijinternational/51/3/51_498/_article
 
Firoozjaei E; Saidi A; Monshi A; Koshy P, 2011, ‘Effects of Different Calcium Compounds on the Corrosion Resistance of Andalusite-Based Low-Cement Castables in Contact with Molten Al-Alloy’, Metallurgical and Materials Transactions B – Process Metallurgy and Materials Processing Science, 42, pp. 400 – 411, http://dx.doi.org/10.1007/s11663-010-9468-z
 
Kongkarat S; Khanna R; Koshy P; O Kane P; Sahajwalla VH, 2011, ‘Use of waste bakelite as a raw material resource for recarburization in steelmaking processes’, Steel Research International, 82, pp. 1228 – 1239, http://dx.doi.org/10.1002/srin.201100104
 
Koshy P; Gupta SK; Edwards P; Sahajwalla VH, 2011, ‘Effect of BaSO4 on the interfacial phenomena of high-alumina refractories with Al-alloy’, Journal of Materials Science, 46, pp. 468 – 478, http://dx.doi.org/10.1007/s10853-010-4931-4
 
Firoozjaei E; Saidi A; Monshi A; Koshy P, 2010, ‘The effect of microsilica and refractory cement content on the properties of andalusite based low cement castables used in aluminum casthouse’, Ceramica, 56, pp. 411 – 421, http://dx.doi.org/10.1590/S0366-69132010000400016
 
Haq M; Khanna R; Koshy P; Sahajwalla VH, 2010, ‘High-temperature Interactions of Alumina–Carbon Refractories with Molten Iron’, ISIJ International, 50, pp. 806 – 812, http://www.jstage.jst.go.jp/article/isijinternational/50/6/50_804/_article
 
Zaharia M; Sahajwalla VH; Khanna R; Koshy P; O Kane P, 2009, ‘Carbon/Slag Interactions between Coke/Rubber Blends and EAF Slag at 1 550 degrees C’, ISIJ International, 49, pp. 1513 – 1521
 
Koshy P; Gupta SK; Sahajwalla VH; Edwards P, 2008, ‘Effect of CaF2 on interfacial phenomena of high alumina refractories with Al alloy’, Metallurgical and Materials Transactions B – Process Metallurgy and Materials Processing Science, 39, pp. 603 – 612
 
Koshy P; Gupta SK; Sahajwalla VH; Edwards PS, 2008, ‘Effect of silica on high-temperature interfacial phenomena of monolithic refractories with Al alloy’, Metallurgical and Materials Transactions B – Process Metallurgy and Materials Processing Science, 39, pp. 331 – 339, http://dx.doi.org/10.1007/s11663-008-9138-6
Preprints
 
Wang Y; Arandiyan H; Mofarah SS; Shen X; Bartlett S; Koshy P; Sorrell C; Sun H; Pozo-Gonzalo C; Dastafkan K; Britto S; Bhargava S; Zhao C, 2023, Stacking Faults Defect-Rich MoNi Alloy for Ultrahigh-Performance Hydrogen Evolution, http://dx.doi.org/10.21203/rs.3.rs-2537350/v1
 
Chen W-F; Mofarah SS; Hanaor DAH; Koshy P; Chen H-K; Jiang Y; Sorrell CC, 2022, Enhancement of Ce and Cr Codopant Solubility and Chemical Homogeneity in TiO2 Nanoparticles through Sol Gel versus Pechini Syntheses, http://dx.doi.org/10.48550/arxiv.2203.11507
 
Jiang Y; Toe CY; Mofarah SS; Cazorla C; Chang SLY; Yin Y; Zhang Q; Lim S; Yao Y; Tian R; Wang Y; Zaman T; Arandiyan H; Andersson GG; Scott J; Koshy P; Wang D; Sorrell CC, 2022, Direct Hydrogen Production from Water/Seawater by Irradiation/Vibration-Activated Using Defective Ferroelectric BaTiO3-x Nanoparticles, , http://dx.doi.org/10.48550/arxiv.2206.14961
 
Ma H; Ren H; Liu Z; Koshy P; Sorrell CC; Hart JN, 2021, DFT Investigation of pH-Driven Oxygen Vacancy Formation-Annihilation in CeO2, , http://dx.doi.org/10.48550/arxiv.2104.10992
 
Liua Z; Ma H; Sorrell CC; Koshy P; Hart JN, 2020, Enhancement of light absorption and oxygen vacancy formation in CeO2 by transition metal doping: A DFT study, , http://dx.doi.org/10.48550/arxiv.2012.06195
 
Lehrer N, 1996, Treatment With Thyrotropin-Releasing Hormone (TRH) in Patients With Traumatic Spinal Cord Injuries, , http://dx.doi.org/10.1097/01253086-199620010-00024
 
Lehrer N, 1996, Treatment With Thyrotropin-Releasing Hormone (TRH) in Patients With Traumatic Spinal Cord Injuries, , http://dx.doi.org/10.1097/01253086-199620010-00024
 
Conference Papers
 
Wong VC; Holmes R; Muránsky O; Koshy P; Sorrell CC; Slater SL; Wood CA, 2024, ‘Development and characterisation of ultra-high temperature ceramics (UHTCs) for extreme operating conditions’, in 11th Australasian Congress on Applied Mechanics, ACAM 2024, pp. 142 – 158
 
Chen W-F; Irani G; Sorrell CC; Liu R; Koshy P, 2017, ‘Effects of Codopant (Co + V) Concentration and Distribution on the Photocatalytic Properties of Sol-Gel-Derived TiO2 Thin Films’, in Zeng Q; Bandyopadhyay S (ed.), Proceedings of iCMEMS Conference 2017, Science, Technology and Management Crest Australia, Sydney, pp. 51 – 56, presented at 1st International Conference on Mineral Engineering and Materials Science (iCMEMS 2017), Sydney, 20 November 2017 – 22 November 2017
 
Dankwah JB; Dankwah J; Koshy P; Dankwah JR, 2017, ‘PRODUCTION OF METALLIC IRON FROM THE OPON MANSI IRON ORE USING CARBONACEOUS MATERIALS GENERATED FROM DISCARDED ‘TAKE-AWAY’ FOOD CONTAINERS’, in Proceedings of COM 2017 – 56th Annual Conference of Metallurgists, MET SOC, Vancouver, presented at COM 2017 – 56th Annual Conference of Metallurgists, Vancouver, 27 August 2017 – 30 August 2017
 
Koshy P; Choi SK; Adabifiroozjaei E; Gupta S; Sorrell CC; Bucknall M; Thomas D; Rawal A; Jang DM, 2017, ‘Effect of Polymer Blending on the Properties of Coal Tars Produced by Pyrolysis’, in Zeng Q; Bandyopadhyay S (ed.), Proceedings of iCMEMS Conference 2017, Science, Technology and Management Crest Australia, Sydney, pp. 45 – 50, presented at 1st International Conference on Mineral Engineering and Materials Science (iCMEMS2017), Sydney, 20 November 2017 – 22 November 2017
 
Koshy P; Reilly H; Schreck L; Chen W-F; Gupta S; Arns JY; Arns C; Andriopoulous N; Hockings K; Drew M, 2017, ‘High-Temperature Strength Evolution in Cokes’, in Zeng Q; Bandyopadhyay S (ed.), Proceedings of iCMEMS Conference 2017, Science, Technology and Management Crest Australia, Sydney, pp. 39 – 44, presented at 1st International Conference on Mineral Engineering and Materials Science (iCMEMS2017), Sydney, 20 November 2017 – 22 November 2017
 
Lee TC; Koshy P; Abdullah HZ; Idris MI, 2017, ‘Biomimetic bone-like apatite coating on anodised titanium in simulated body fluid under UV irradiation’, in Materials Science Forum, pp. 251 – 255, http://dx.doi.org/10.4028/www.scientific.net/MSF.888.251
 
Cheung KH; Pabbruwe M; Koshy P; Lee B; Sorrell CC, 2016, ‘Photocatalytic Activation of TiO2 Biomaterials by UV and X-Rays’, in Advances in Science and Technology, Trans Tech Publications, Perugia Italy, pp. 22 – 30, presented at CIMTEC2016, Perugia Italy, 05 June 2016 – 09 June 2016, http://dx.doi.org/10.4028/www.scientific.net/ast.99.22
 
Dankwah JR; Aakiiyir MN; Koshy P, 2016, ‘Microwave Production of Iron Nuggets from the Pudo Iron Ore using Charred ‘Pito’ Waste as Reductant’, in Proceedings of the 4th UMaT International Mining and Mineral Conference, 4th UMaT International Mining and Mineral Conference, Tarkwah Ghana, pp. MR93 – MR99, presented at 4th UMaT International Mining and Mineral Conference, Tarkwah Ghana, 03 August 2016 – 06 August 2016
 
Dankwah JR; Abotar E; Gordon JJK; Koshy P, 2016, ‘Recycling Waste Electrical Socket as a Carbon Resource in Ironmaking’, in Proceedings of the 4th UMaT International Mining and Mineral Conference, 4th UMaT International Mining and Mineral Conference, Tarkwah Ghana, pp. MR153 – MR160, presented at 4th UMaT International Mining and Mineral Conference, Tarkwah Ghana, 03 August 2016 – 06 August 2016
 
Dankwah JR; Koshy P; Agbenuvor BS, 2016, ‘Production of Iron Nuggets from the Akpafu-Todzi Iron Ore using Waste Plastics and Waste Biomass as Reductants’, in Ghana Journal of Technology, pp. 54 – 60, http://www2.umat.edu.gh/gjt/index.php/gjt/article/view/13/5
 
Dwumah Jr D; Asamoah DN; Koshy P; Dankwah JR, 2016, ‘Production of Metallic Iron from Mt Tokadeh Iron Ore using Waste Polymers as Reductant’, in Proceedings of the 4th UMaT International Mining and Mineral Conference, 4th UMaT International Mining and Mineral Conference, Tarkwah Ghana, pp. MR24 – MR29, presented at 4th UMaT International Mining and Mineral Conference, Tarkwah Ghana, 03 August 2016 – 06 August 2016
 
Koshy P; Dankwah JR; Agbenuvor BS, 2016, ‘Production of Iron Nuggets from the Akpafu-Todzi Iron Ore using Waste Plastics and Waste Biomass as Reductants’, in Proceedings of the 4th UMaT International Mining and Mineral Conference, Proceedings of the 4th UMaT International Mining and Mineral Conference, Tarkwah Ghana, pp. MR15 – MR23, presented at Proceedings of the 4th UMaT International Mining and Mineral Conference, Tarkwah Ghana, 03 August 2016 – 06 August 2016
 
Ibraheem S; Standard O; Koshy P; Devasahayam S; Bandyopadhyay S; Bandyopadhyay S, 2016, ‘SEM study of debonding / pull-out features & FTIR analysis of bonding in fly ash- epoxy particulate composites’
 
Dankwah JR; Baarwuah E; Dankwah J; Awotwe-Appiah F; Koshy P, 2015, ‘Generation of Carbonaceous Material from “Pure Water Sachets” and their Subsequent Utilisation as Reductants for the Opon Mansi Iron Ore’, in Proceedings of COM2015, Conference of Metallurgists, Toronto Canada, presented at Conference of Metallurgists, Toronto Canada, 23 August 2015 – 26 August 2015
 
Dankwah JR; Baawuah E; Dankwah J; Koshy P, 2015, ‘Recycling mixed plastic waste and its blend with sawdust as reductant in ironmaking’, in Gulsun M; Onel O; Basarir H; Karadeniz M; Torun Bilgic E (eds.), Proceedings of the 24th International Mining Congress of Turkey, IMCET 2015, Chamber of Mining Engineers of Turkey, Antalya, Turkey, pp. 1389 – 1394, presented at 24th International Mining Congress of Turkey, Antalya, Turkey, 14 April 2015 – 17 April 2015
 
Dankwah JR; Dankwah J; Asamoah DN; Agyei G; Koshy P, 2015, ‘Reaction Behaviour during Heating of Tokadeh Magnetite Ore with Carbonaceous Material Generated from Waste “Pure Water Sachets’, in Proceedings of AISTech 2015 Conference, Proceedings of AISTech 2015 Conference, Cleveland USA, presented at Proceedings of AISTech 2015 Conference, Cleveland USA, 07 May 2015 – 09 May 2015
 
Dankwah JR; Dankwah J; Awotwe-Appiah F; Fosu AY; Koshy P, 2015, ‘Carbothermal Upgrading of the Awaso Bauxite Ore using Waste Polypropylene as Reducing Agent’, in Carbothermal Upgrading of the Awaso Bauxite Ore using Waste Polypropylene as Reducing Agent, Conference of Metallurgists (COM 2015), Toronto Canada, presented at Conference of Metallurgists (COM 2015), Toronto Canada, 23 August 2015 – 26 August 2015
 
Dankwah JR; Dankwah J; Owusu KB; Koshy P, 2015, ‘Utilisation of Waste Automotive Engine Oil and its Blends with Biomass as Reductants in Ironmaking’, in Proceedings of Association of Iron and Steel Technology 2015, AISTech 2015 Conferenc, Cleveland USA, presented at AISTech 2015 Conferenc, Cleveland USA, 07 May 2015 – 09 May 2015
 
Gupta S; Koshy P; Sorrell CC, 2015, ‘High Temperature Characteristics of Coke in Blast Furnaces’, in Proceedings of the 10th CSM Steel Congress & the 6th Baosteel Biennial Academic Conference, 10th CSM Steel Congress & the 6th Baosteel Biennial Academic Conference, Shanghai, presented at 10th CSM Steel Congress & the 6th Baosteel Biennial Academic Conference, Shanghai, 20 October 2015 – 23 October 2015
 
Nguyen DD; Devlin L; Koshy P; Sorrell CC, 2015, ‘Quantitative X-Ray Diffraction Analysis of Anhydrous and Hydrated Portland Cement – Part 2: Computer-Based Methods’, in Advanced Materials Research, Trans Tech Publications, pp. 498 – 503, http://dx.doi.org/10.4028/www.scientific.net/AMR.1087.498
 
Nguyen DD; Devlin L; Koshy P; Sorrell CC, 2015, ‘Quantitative X-Ray Diffraction Analysis of Anhydrous and Hydrated Portland Cement – Part 1: Manual Methods’, in Advanced Materials Research, Trans Tech Publications, pp. 493 – 497, http://dx.doi.org/10.4028/www.scientific.net/AMR.1087.493
 
Sorrell C; Koshy P; Gupta S, 2015, ‘Multimodule System for Wastewater Treatment by Photocatalysis’, in Proceedings of the 10th CSM Steel Congress & the 6th Baosteel Biennial Academic Conference, 10th CSM Steel Congress & the 6th Baosteel Biennial Academic Conference, Shanghai, presented at 10th CSM Steel Congress & the 6th Baosteel Biennial Academic Conference, Shanghai, 23 October 2015 – 26 October 2015
 
Abdullah HZ; Koshy P; Sorrell CC, 2014, ‘Anodic Oxidation of Titanium in Mixture of β-Glycerophosphate (β-GP) and Calcium Acetate (CA)’, in Key Engineering Materials, Scientific Net, pp. 275 – 280, http://dx.doi.org/10.4028/www.scientific.net/KEM.594-595.275
 
Chen WF; Koshy P; Zhu B; Sorrell CC, 2014, ‘Effect of film thickness on the photocatalytic performance of TiO2 thin films deposited by spin coating’, in Lin HT; Katoh Y; Matyas J (eds.), Ceramic Engineering and Science Proceedings, American Ceramic Society, FL, Daytona Beach, pp. 51 – 60, presented at 38th International Conference on Advanced Ceramics and Composites (ICACC), FL, Daytona Beach, 26 January 2014 – 31 January 2014, http://dx.doi.org/10.1002/9781119040323.ch6
 
Dankwah JR; Koshy P, 2014, ‘Effect of Waste Plastics Addition on the Reduction of Iron Oxide by Metallurgical Coke’, in Journal of Science and Technology Ghana, Kwame Nkrumah University of Science and Technology
 
Dankwah JR; Koshy P, 2014, ‘Effect of Waste Plastics Addition on the Reduction of Iron Oxide by Sawdust’, in Fukuzawa R (ed.), Proceedings of the Conference of Metallurgists 2014, Metallurgical Society (MetSoc) Canada, Vancouver BC Canada, presented at Conference of Metallurgists 2014, Vancouver BC Canada, 28 September 2014 – 01 October 2014
 
Dankwah JR; Koshy P, 2014, ‘Recycling ‘Take Away Food’ Containers (Polystyrene) as a Carbon Resource in Ironmaking’, in 3rd UMAT Biennial International Mining and Mineral Conference, 3rd UMAT Biennial International Mining and Mineral Conference, Tarkwa Ghana, pp. 251 – 258, presented at 3rd UMAT Biennial International Mining and Mineral Conference, Tarkwa Ghana, 30 July 2014 – 02 August 2014
 
Dankwah JR; Koshy P, 2014, ‘Synthesis of Sulphur-Free Metallic Iron from Iron Oxide using High-sulphur Containing Carbonaceous Materials as Reducing Agents’, in Fukuzawa R (ed.), Proceedings of the Conference of Metallurgists (COM2014), Metallurgical Society (MetSoc) Canada, Vancouver BC Canada, presented at Conference of Metallurgists 2014, Vancouver BC Canada, 28 September 2014 – 01 October 2014
 
Abdulla H; Koshy P; Sorrell CC, 2013, ‘Gel Oxidation of Titanium for Biomedical Application’, in Advanced Materials Research, Trans Tech Publications, pp. 122 – 126, http://dx.doi.org/10.4028/www.scientific.net/AMR.620.122
 
Dankwah JR; Koshy P, 2013, ‘Production of Metallic Iron from Iron Oxide (Fe2O3) Using End-of-Life Rubber Tyre and its Blends with Metallurgical Coke as Reductants’, in International Journal of Engineering Research in Africa, pp. 1 – 12, http://dx.doi.org/10.4028/www.scientific.net/JERA.10.1
 
2013, ‘Photoelectrochemical Properties of WO3 Nanoparticulate Thin Films Prepared by Carboxylic Acid-Assisted Electrodeposition’, http://dx.doi.org/10.1016/j.tsf.2013.03.125
 
Lin C; Chen H; Nakaruk A; Koshy P; Sorrell CC, 2013, ‘Effect of Annealing Temperature on the Photocatalytic Activity of TiO2 Thin Films’, http://dx.doi.org/10.1016/j.egypro.2013.06.794
 
Abdulla H; Koshy P; Sorrell CC, 2012, ‘Gel Oxidation of Titanium for Biomedical Application’, Penang, Malaysia, presented at International Conference on X-Rays and Related Techniques and Industry, Penang, Malaysia, 03 July 2012 – 05 July 2012
 
Kwong WL; Qiu H; Nakaruk A; Koshy P; Sorrell CC, 2012, ‘Photoelectrochemical Properties of WO3 Thin Films Prepared by Electrodeposition’, in Yupapin P; PivsaArt S; Ohgaki H (eds.), Energy Procedia, Elsevier Science, THAILAND, Ubon Ratchathani, pp. 617 – 626, presented at 10th Eco-Energy and Materials Science and Engineering Symposium (EMSES), THAILAND, Ubon Ratchathani, 05 December 2012 – 08 December 2012, http://dx.doi.org/10.1016/j.egypro.2013.06.793
 
2012, ‘Surface Modification of Titanium Dioxide Thin Films by Manganese Doping’, http://dx.doi.org/10.1380/ejssnt.2012.103
 
Haq M; Khanna R; Koshy P; Sahajwalla VH; Saha-Chaudhury NM, 2009, ‘Recycling alumina-carbon refractory waste in steelmaking: Mechanisms of refractory degradation’, in AISTech – Iron and Steel Technology Conference Proceedings, Association for Iron and Steel Technology, AISTECH, Warrendale, PA, United States, presented at AISTech 2009, St. Louis, Mo., USA, 04 May 2009 – 07 May 2009
 
Sahajwalla VH; Kongkarat S; Koshy P; Khanna R; Saha-Chaudhury NM; O Kane P; Dicker JD; Skidmore C; Knights D, 2009, ‘Carbon dissolution in steelmaking process – Recarburization using waste plastics’, in AISTech – Iron and Steel Technology Conference Proceedings, Association for Iron and Steel Technology, AISTECH, Warrendale, PA, United States, presented at AISTech 2009, St. Louis, Mo., USA, 04 May 2009 – 07 May 2009
 
Sahajwalla VH; Rahman MF; Zaharia M; Koshy P; Khanna R; Saha-Chaudhury NM; O Kane P; Dicker JD; Skidmore C; Knights D; Lee J, 2009, ‘Gas phase reactions of coke blends with plastics for chemical energy input into EAF steelmaking’, in AISTech – Iron and Steel Technology Conference Proceedings, Association for Iron and Steel Technology, AISTECH, Warrendale, PA, United States, presented at AISTech 2009, St. Louis, Mo., USA, 04 May 2009 – 07 May 2009
 
Koshy P; Gupta SK; Sahajwalla VH; Edwards P, 2006, ‘Wetting behaviour of high alumina monolithic by non-ferrous metals: Role of non-wetting agents’, in Materials Science and Technology Conference, Materials Science and Technology Conference, Cincinnati, Ohio, pp. 55 – 66, presented at Materials Science and Technology Conference, Cincinnati, Ohio, 15 October 2006 – 19 October 2006
 
Gupta SK; Koshy P; Sahajwalla VH; Pauline M; Leicht N, 2005, ‘Dynamic Wetting of High Alumina Monolithic Refractories by Aluminium Alloy’, in Sustainable developments in metals processing : proceedings of the John Floyd International Symposium, AusIMM, Melbourne, Vic, presented at John Floyd International Symposium – Sustainable Developments in Metals Processing, Melbourne, Australia, 03 July 2005 – 06 July 2005
 
Gupta SK; Koshy P; Sahajwalla VH; Pauline M; Leicht N, 2005, ‘Influence of non-wetting agents on the modification of dynamic wetting of high alumina monolithic refractories by aluminium alloy’, in UNITECR ’05 :proceedings of Unified International Technical Conference on Refractories, John Wiley & Sons, New York, NY, presented at Unified International Technical Conference on Refractories : 9th Biennial Worldwide Congress on Refractories, Orlando, Florida, 08 November 2005 – 11 November 2005
 
Conference Posters
 
Woo C; Schreck L; Cheung KH; Chen WF; PAbbruwe MB; Sorrell CC; Koshy P, 2017, ‘Use of anodic oxidation to enhance the biocompatibility of tantalum implants’, Adelaide, pp. 200 – 200, presented at 2017 ANZORS-RSA Joint Conference, Adelaide, 06 October 2017 – 08 October 2017
 
Conference Presentations
 
Pignatta G; Wong V; Koshy P; Sorrell CC, 2022, ‘Can geopolymer materials be optimized for sustainable building envelope applications? A preliminary development and characterization study’, http://dx.doi.org/10.3390/environsciproc2021012011
 
Schreck L; Woo C; Cheung KH; Ho KKK; Pabbruwe MB; Koshy P; Sorrell CC, 2017, ‘Anti-Microbial Bioceramic Coatings on Ti6Al4V Surfaces by Anodisation’, presented at 2017 ANZORS-RSA Joint Conference, Adelaide, 06 October 2017 – 08 October 2017
 
Lin C; Chen H; Koshy P; Nakaruk A; Sorrell CC, (eds.), 2012, ‘Effect of Annealing Temperature on the Photocatalytic Activity of TiO2 Thin Films’, presented at Eco-Energy and Materials Science and Engineering Symposium 2012, Ubon-ratchathani, Thailand,, 05 December 2012 – 08 December 2012, http://dx.doi.org/10.1016/j.egypro.2013.06.794
 
Patents
 
Sorrell C; Koshy P; Koszo A, 2021, Percolated mullite and a method of forming same, Japan, Patent No. 6847406, http://www.google.com/patents/US9527775
 
Sorrell CC; Koshy P; Koszo A, 2013, Percolated Mullite and Methods of Forming Same WO/2013/082670, Australia, Patent No. WO/2013/082670
 
Kwong WL; Qiu H; Koshy P; Nakaruk A; Sorrell CC, 2012, ‘Photoelectrochemical Properties of WO3 Thin Films’, presented at 10th Eco-Energy and Materials Science and Engineering Symposium 2012, Ubon- ratchathani, 05 December 2012 – 08 December 2012
No. Grants Role Timeframe Funding
1 ARC Industry Mid-Career Fellowship
Optically Tunable Functional Nano-Coatings of Fly Ash-Based Ceramics		 Sole CI 2024 – 2028 1,077,650
450,092 (Vecor)
2 ARENA
Blast Furnace Innovations: Integrating New Injections and Burdens for Sustainable, Low-Carbon Ironmaking Project		 Co-CI 2024 – 2028 3,800,000 (total)
3 ARC Linkage
Electrodeposited Cathodes with Tunable Stoichiometry for Alkaline Batteries 		Lead CI 2024 – 2027 508,018
465,794 (Vecor)
4 Joint UNSW-Vecor Trailblazer Project
Nanostructured Materials (Universal Precursor Materials and Seawater Splitting) and Transformation of Fly Ash (Ceramic Filler)		 Lead CI 2023 – 2027 4,038,348 (Vecor)
1,522,156
5 ACARP
Biochar-Coke Integration for Improved Coke Strength and Performance 		Lead CI 2024 – 2025 244,400
6 UON/BHP
Characterisation and Quality Testing of Metallurgical Cokes/Coal		 Lead CI 2023 – 2025 147,200
7 Brickworks
Optimisation of Raw Materials In Brickmaking		 Lead CI 2022 – Present 10,000
8 CSIRO Clayton
Surface and Structural Characterisation of Crystal Surfaces 		Lead CI 2024 6,000
9 CSIRO Lindfield
Characterisation of Surfaces and Advanced Thin Films 		Lead CI 2022 – 2023 74,259
10 POSCO
Combustion Characteristics of High Volatile Coal for BF Ironmaking 		Lead CI 2022 – 2023 36,360
11 Innovations Connections

RCS Air Quantum Dot Nanofluid Development 		Joint CI 2022 – 2023 97,889
12 RCS Air

Preliminary Quantum Dot Nanofluid Development 		Co-CI 2022 20,000
Prior to Promotion to Level D
13 ACARP
Design of Cokes from Biomass-Coal Blends for Blast Furnace Ironmaking: Scoping Study 		Lead CI 2022 – 2023 181,700
14 ACARP
Effect of Coke Properties on High-Temperature Strength and Hot Metal Reactions under Blast Furnace Conditions 		Lead CI 2020 – 2022 369,700
15 ARC LP
New Ceramic: Fully Stabilised Monoclinic ZrO₂		 Research Fellow 2020 – 2023 406,100

300,000 (Vecor)
16 ARC LP
Aligned Mullite Fibres for Metal Matrix Composites 		Co-CI 2017 – 2020 340,000

195,000 (TopFibre)
17 ACARP
Blend Characteristics in High-Temperature Mechanisms in Cokes 		Lead CI 2019 – 2021 309,800
18 ACARP
In Situ High Temperature Strengths of Low CSR Cokes 		Lead CI 2018 – 2019 86,000
19 BHP-UON
Effect of Microalgae Blending in Cokemaking 		Lead CI 2022 33,081
20 Map-to-Mine
Assessment of Mineral Resource Quality for Industries 		Co-CI 2021 – 2022 53,420
21 Brickworks
Optimisation of Raw Materials In Brickmaking 		Lead CI 2019 – 2022 33,688
22 Allegra Orthopaedics

Optimisation of Biomedical Products 		Joint CI 2018 – 2023 69,124
23 POSCO

Survey of Coal Study Trends and Property Database 		Lead CI 2020 – 2021 96,114
24 BHP

Effect of Gasification Conditions on Coke Reduction 		Lead CI 2020 – 2021 69,449
25 POSCO

Characterisation of Anthracite/Thermal Coal Grain Interfaces 		Lead CI 2018 – 2019 76,089
26 Vecor

Stabilisation of Zirconia – Scoping Work 		Lead CI 2020 108,042
27 Vecor

Ceramic Composite Products from Fly Ash 		Lead CI 2018 – 2022 20,612
28 CSIRO

Characterisation of Surfaces and Advanced Thin Films 		Lead CI 2021 17,820

Personal Awards

Vice Chancellors Award for Teaching Excellence UNSW 2019
Australian Citation Award for Teaching Excellence Australian Govt 2017
Vice Chancellors Award for Teaching Excellence UNSW 2016
Faculty of Science Award for Teaching Excellence UNSW 2015
Endeavour International Post-Graduate Research Scholarship UNSW 2006 – 2008
1st Rank: Masters Degree (Materials Science and Technology) NIT-C, India 2004
1st Rank & University Medal: Bachelor Degree (Mechanical Engineering) University of Kerala, India 2002

Student Awards

Frederick Zhang 3rd Prize: Student Presentation Materials Australia, Nov 2023, Sydney 2023
Ratan Venkatesan 4th Prize: Student Presentation Materials Australia, Nov 2023, Sydney 2023
Sarra Mourad 2nd Prize: Poster Presentation Biomedical Presentation Event, Oct 2023 2023
Marcus Miljak University Medal Bachelor in Materials Engineering 2022
Marcus Miljak 2nd Prize: Student Presentation Materials Australia, Nov 2022, Sydney 2022
Jodie Mann 1st Prize: Poster Presentation Materials Australia, Nov 2022, Sydney 2022
Vienna Wong ANSTO FutureNow Scholarship PhD Scholarship Topup 2022
Aurpa Bhuiyan AINSE Residential Student Scholarship PhD Scholarship Topup 2022
Bernadette Pudadera University Medal Bachelor in Materials Engineering / Master in Biomedical Engineering 2021
Jiachen Jiang University Medal Bachelor in Materials Engineering 2021
Edward Whitelock 2nd Prize: Student Presentation Materials Australia Oct 2021, Sydney 2021
Vienna Wong 4th Prize: Student Presentation Materials Australia Oct 2021, Sydney 2021
Joel Luke Abraham AINSE Residential Student Scholarship PhD Scholarship Topup 2021
Thibault de Villenoisy 1st Prize: Presentation Materials Engineering Section: Faculty of Science Thesis Presentation 2021
Madi Moar University Medal Bachelor in Materials Engineering / Master in Biomedical Engineering 2020
Joel Luke Abraham University Medal Bachelor in Materials Engineering 2020
Bernadette Pudadera 1st Prize: Student Presentation Materials Australia 7 Nov 2020, Sydney 2020
Aurpa Bhuiyan 3rd Prize: Student Presentation Materials Australia 7 Nov 2020, Sydney 2020
Vicki Zhong University Medal Bachelor in Materials Engineering / Master in Biomedical Engineering 2019
Alan Cen University Medal Bachelor in Materials Engineering / Master in Biomedical Engineering 2019
Keenan Burrough University Medal Bachelor in Materials Engineering 2019
Sophie E. Armstrong 1st Prize: Student Presentation Materials Australia 23 Oct 2019, Sydney 2019
Michelle Yeoh 1st Prize: Poster Presentation ANSTO Young Researchers Forum 8 September 2019, Sydney 2019
Sajjad S. Mofarah 1st Prize: Best Presentation Intl. Conference of Nanomaterials and Biomaterials, 10-12 December 2018, Barcelona, Spain 2018
Hangjuan Ren 1st Prize: Best Presentation ACS Fall Conference, 19-23 August, Boston, MA, USA – Materials for Energy Session 2018
Kochurani K. Johnson 1st Prize: Poster Presentation CAMS2018, 26-29 November, Wollongong 2018
Michelle Yeoh 1st Prize: Poster Presentation Materials Australia, 5 December 2018, Sydney 2018
Benjamin Fishburn 2nd Prize: Student Presentation Materials Australia 6 Dec 2017, Sydney 2017
Zhao Liu 3rd Prize: Poster Presentation Materials Postgraduate Society Poster Competition, UNSW 2016
Sultan Albarakati 1st Prize: Poster Presentation Materials Postgraduate Society Poster Competition, UNSW 2015
Wen-Fan Chen 3rd Prize: Poster Presentation Materials Postgraduate Society Poster Competition, UNSW 2014
Hao Qiu & Wai-Ling Kwong Best Paper: Nanotechnology 10th Eco-Energy and Materials Science and Engineering (EMSES2012) 5-8 December 2012, Ubon-Ratchathani, Thailand 2012
Hsin Chen 2nd Prize: Presentation 10th Eco-Energy and Materials Science and Engineering (EMSES2012) 5-8 December 2012, Ubon-Ratchathani, Thailand 2012

 

Teaching Awards

  • 2019:  Vice Chancellor’s Award for Teaching Excellence UNSW
  • 2017:  Australian Citation Award for Teaching Excellence
  • 2016:  Vice Chancellor’s Award for Teaching Excellence UNSW
  • 2015: Faculty of Science Excellence in Teaching Award

Current Courses

  • MATS4005:  Functional Materials and Composites (2020 – Present)
  • MATS4002: Design with Advanced Ceramics (2014 – Present)
  • MATS6003:  Presentation Skills (Masters) (2017 – Present)

Laboratory Activity Coordinator

  • MATS1101
  • MATS1192
  • MATS2004

Past Courses

  • MATS3004: Polymer Science and Engineering 1 (2014-2019)
  • MATS4006:  Polymer Science and Engineering 2 (2014-2017)
  • MATS2294: Thermal and Mechanical Properties of Ceramics (2012)
  • MATS2183: Refractories (2011)
Supervision Metrics

Supervision Metrics for Pramod Koshy

 

PhD / Masters

      1. Thibault de Villenoisy – MOFs for Novel Catalyst Synthesis (PhD)
      2. Honghao Li – Porous Silicon for Hydrogen Storage (PhD)
      3. Yu-Chun Huang – Size Effects of Catalytic BTO (M.Phil)
      4. Yu-Fu Tseng – Doped Cathodes for LIB (M.Research)
      5. Sunny Fan – Carbonaceous Materials for Hydrogen Storage (PhD)
      6. Joel Abraham – Glass Ceramics for Nuclear Waste Storage (PhD)
      7. Xiaoran Zheng – Nanostructured Materials for Energy (PhD)
      8. Vienna Wong – Ultra-High Temperature Ceramics (PhD)
      9. Aurpa Bhuiyan – Glass Ceramics for Nuclear Waste Storage (PhD)
      10. Sharon Sasmita – Porous Silicon for Hydrogen Storage (PhD)
      11. Marcus Miljak –  X-Ray Detection Unit for Lunar Exploration (PhD)
      12. Kaili Xue – BTO Morphologies for Energy Applications (PhD)
      13. Saman Mostafapoor – Na-Ion Battery Electodes (PhD)
      14. Husn Ara Chauhan – Nanoparticle Polymer Functional Composites (PhD)
      15. Suchen Huang – Novel Catalysts for Chemical Processes (PhD)
      16. Yueyue Luo – Novel Electrode Materials for Energy Storage (PhD)
      17. Frederick Zhang – Glass-Ceramics for Nuclear Waste Storage (PhD)
      18. Huangang Lin – Catalysts for CO2 Conversion (PhD)
      19. Shahrzad Shaddel
      20. Junyi Ning

Masters Coursework

      1. Sherie Xue

Honours

      1. Lovina Chen – Electrode Corrosion (Cochlear)
      2. Liang Xue – Fly Ash Based Composites (VECOR)
      3. Louise McGuiggan – X-ray Detector Development (CSIRO)
      4. Fenglin Zhuo – X-ray Detector Development (CSIRO)
      5. Jess Degeling – Nuclear Waste Storage (ANSTO)
      6. Ian D’Souza – Battery Cathode Development (VECOR)
      7. Nathan Phanith – Catalyst Development for HER/OER (VECOR)
      8. Zijuan Zhang – Nuclear Ceramic Development
      9. Gerardo Pareja-Delgado – Analysis of Building Products (Brickworks)
      10. Mohammed Ali – Electrode Corrosion (Cochlear)
      11. Eleana Fairbairn – Electrode Corrosion (Cochlear)

Past Higher Degree Students

      1. Somyote Kongkarat (PhD) [2011]
      2. James Dankwah (PhD) [2012]
      3. Renzhong Zhang (MPhil) [2012]
      4. Wai-Ling Kwong (PhD) [2014]
      5. Hao Qiu (M/Phil) [2014]
      6. Chau-Hyun Pham (PhD) [2014]
      7. Chung-Pei Lin (M/Res) [2014]
      8. Cindy Chen (M/Res) [2014*]
      9. Cindy Wang (M/Phil) [2015]
      10. Dinh Nguyen (PhD) [2015]
      11. Jieyu Wang (M/Res) [2016]
      12. Sultan Al-Barakati (M/Phil) [2016]
      13. Shaohua Qi (M/Phil) [2016]
      14. Christine Lin (PhD) [2016]
      15. Wen-Fan Chen (PhD) [2016]
      16. Supphatuch Ukritnukun (PhD) [2017]
      17. Esmaeil Adabifiroozjaei (PhD) [2017]
      18. Samuel Ho (M/Res) [2018]
      19. Hsin-Kai Chen (M/Res) [2018]
      20. Kenny Cheung (PhD) [2018]
      21. Rashid Mehmood (PhD) [2018]
      22. Imrana Kabir (PhD) [2018]
      23. Hangjuan Ren (PhD) [2019]
      24. Zhao Liu (PhD) [2019]
      25. Yue Jiang (M/Res) [2019]
      26. Ghazaleh Bahmanrokh (PhD) [2019]
      27. Sajjad Mofarah (PhD) [2020]
      28. Yuwen Xu (M/Phil) [2020]
      29. Zhiyuan Liu (M/Res) [2020]
      30. Lutful Amin (PhD) [2020]
      31. Hongyang Ma (PhD) [2021]
      32. Mahdi Motamadi (PhD) [2021]
      33. Xiaoran Zheng (M/Res) [2021]
      34. Xinchen Dai (M/Res) [2021]
      35. Zekun Dong (M/Phil) [2021]
      36. Ayda Khosravanihaghighi (PhD) [2022]
      37. Zile Ye (M/Phil) [2022]
      38. Florence Lui (PhD) [2022]
      39. Kochurani Johnson (PhD) [2022]
      40. Newton Amaldoss (PhD) [2023]
      41. Tasmia Zaman (PhD) [2023]
      42. Hao Zhang (PhD) [2023]
      43. Yue Jiang (PhD) [2023]
      44. Gagan Jalandhra (PhD) [2024]

Past Honours

      1. Jonathan Tan (2012) [Shinagawa Refractories Project]
      2. Chung-Pei Lin (2012)
      3. Stephen Ngu (2013)
      4. Holstein Wong (2013)
      5. Daniel Baxter (2013)
      6. Ali Chour (2013) [Brickworks Project]
      7. Kenny Cheung (2013) [Brickworks Project]
      8. Kylie Pandika (2014)
      9. Ali Boussi (2014) [Brickworks Project]
      10. Martin Yoon (2014) [POSCO Project]
      11. Seok Yong Cho (2014) [POSCO Project]
      12. Gavin Chan (2014) [Brickworks Project]
      13. Lowin Chung (2015)
      14. David Almeida (2015)
      15. Nathan Doran (2015)
      16. Aparna Nair (2015)
      17. Yuan Kai Heo (2015)
      18. Hsin-Kai Chen (2015)
      19. Alexander Ho (2016) [Cochlear Project]
      20. Sarah Pearn (2016)
      21. Angela Le (2016)
      22. Hao Zhang (2016)
      23. Gustad Irani (2016)
      24. Josh Haley (2017) [Brickworks Project]
      25. Helen Reilly (2017)
      26. Benjamin Fishburn (2017) [Brickworks Project]
      27. Christopher Byrnes (2017)
      28. Luisa Schreck (2017)
      29. Kevin Pei (2017) [Cochlear Project]
      30. Andrew Ham (2017)
      31. Jason Irawan (2017)
      32. Gita Naidu (2017)
      33. James Jovanovski (2017)
      34. Chris Tan (2017)
      35. Vicki Zhong (2018) [Cochlear Project]
      36. Alan Cen (2018)
      37. Naomi Ho (2018)
      38. Amanda Chen (2018)
      39. Simon Qi (2018) [Cochlear Project]
      40. Chantelle Malacco (2018)
      41. William Jervis (2018) [Brickworks Project]
      42. Michelle Yeoh (2018) [Brickworks Project]
      43. Zile Ye (2018)
      44. Madi Moar (2019)
      45. Sophie Armstrong (2019) [Cochlear Project]
      46. Carrie Zhu (2019) [Cochlear Project]
      47. Kristin Martinoski (2019)
      48. Jialuo Ke (2019) [ANSTO Project]
      49. Benjamin Muffett (2019) [ANSTO Project]
      50. Vincent Wong (2019) [Brickworks Project]
      51. Keenan Burrough (2019) [ANSTO Project]
      52. Corey Vutukuri (2019)
      53. Liam Olivieri (2019)
      54. Jim Liu (2019) [Cochlear Project]
      55. Thibault de Villenoisy (2020) [ANSTO Project]
      56. Muflih Mandara (2020) [ACARP Project]
      57. Brenda Leung (2020)
      58. David Halim (2020) [Brickworks Project]
      59. Aurpa Bhuiyan (2020) [ANSTO Project]
      60. Amber Liu (2020)
      61. Hung-Juei Tseng (2020)
      62. Tina Majidi (2020) [Cochlear Project]
      63. Bernadette Pudadera (2020) [Cochlear Project]
      64. Edward Whitelock (2021) [ANSTO Project]
      65. Ying Zhang (2021) [MCM Project]
      66. Jacqualine Huynh (2021)
      67. Weiyu Gao (2021)
      68. Kyle Baddack (2021)
      69. Vienna Wong (2021)
      70. Jiachen Jiang (2021) [Cochlear Project]
      71. Lok Wong (2021) [CSIRO Project]
      72. Ewing Chen (2021) [ANSTO Collaboration Project]
      73. Clayton Feng (2021) [Cochlear]
      74. Katherine Firth (2021) [Cochlear]
      75. Victoria Lam (2021) [Cochlear]
      76. Daniel Lu (2021)
      77. Zijun Meng (2021) 
      78. Naman Bansal (2021)
      79. Justin Wong (2021)
      80. Kenfond Xuan (2021)
      81. Marcus Miljak (2022) [CSIRO]
      82. Calvin Hoang (2022) [Cochlear]
      83. Jodie Mann (2022) [ANSTO]
      84. Sherry Chen (2022) [ANSTO]
      85. Stephanie Mui (2022) [Brickworks]
      86. Aiden Yap (2022) [Brickworks]
      87. Timothy Oberg (2022) [Cochlear]
      88. Nathan Trinh (2022) [Cochlear]
      89. Victoria-Lee Inthavong (2022) [Cochlear]
      90. Ryan Campbell (2022)
      91. John Zheng (2022) [Cochlear]
      92. Jenny Huang (2022) [ANSTO]
      93. Ratan Venkatesan (2023) [ANSTO]
      94. Frederick Zhang (2023) [ANSTO]
      95. Rebecca Ninan (2023)
      96. Jonathan Ren (2023) [Brickworks]
      97. Jeremiah Mullings (2023) [CSIRO]
      98. David Worton (2023) [Cochlear]
      99. Benny Xing (2023)
      100. Sarra Mourad (2023) [ANSTO]
      101. Elike Atsu (2023) [Cochlear]
      102. Marcus Wong (2023)

Past Masters Coursework

      1. Nima Kharkaneh (2013)
      2. Sou Lee (2014)
      3. Jieyu Wang (2014)
      4. Xuting Ge (2015)
      5. Ying Wang (2015)
      6. Hongyang Ma (2015)
      7. Lingyun Liu (2016)
      8. Qiyuan Shi (2017) 
      9. Jiashu Wei (2017)
      10. Selene de Leon Ibarra (2017)
      11. Xichao Zhang (2018)
      12. Yang Hong (2018)
      13. Yiyan Han (2018)
      14. Yucheng Wang (2018)
      15. Dongfang Zhou (2019)
      16. Xinhong Liu (2019)
      17. Chenze Li (2019)
      18. Haoran Ma (2020)
      19. Xiaotong Liu (2021)
      20. Ce Yan (2021)
      21. Quan Liu (2021)
      22. Dinesh Varma (2022)
      23. Liting Zhang (2022)
      24. Suchen Huang (2023)

contact details

+61 (0)2 9385 6038
Room 120, School of Materials Science and Engineering, Hilmer Building E10 UNSW NSW 2052

Social Profiles